380V Aluminium Arch Bending Machine I Beam Steel Cold Bending
Hydraulic type H/I-steel Steel Bar Bending Machine automatic for aluminum
Steel Bar Bending Machine
Assembly and maintenance of Steel Bar Bending Machine:
The i-steel bar bending machine produced by our company has strong structure and convenient disassembly and assembly. When changing the bearing under the driving wheel, remove the motor screw first, and then the screw hole of the motor and the reducer is misaligned. The motor will come out by itself with a screw rod from below, and the reducer will be removed in the same way. Finally remove the bottom of the work table four supporting plate screws (reducer is facing below), from the top to the bottom of the knock, the roller naturally dropped. You put it in from the top when you put it together. The middle movable wheel moves out from the chute and turns over. Knock off the middle shaft first, and then knock off the bearing to replace it with a new bearing.
Parameter of Steel Bar Bending Machine:
| Parameters/Name | LWGJ-300 I-steel cold bending machine |
| Maximum bending area | 250 cm2 |
| Bending speed | 6-6.2 m/min |
| Bending limit | S=345 MPa |
| Specification of machine | 25# |
| Working pressure of hydraulic system | ≤16MPa |
| Hydraulic cylinder propulsion speed | 1-10 mm/s |
| Hydraulic cylinder jacking force | 50 T |
| Effective stroke of hydraulic cylinder | 300mm |
| Rated oil pump pressure | 16 Mpa |
| Reducer type | 42# |
| Driving power | 5.5*2 |
| Totol power | 18 kw |
| Diamension(L*W*H) | 2800*1600*1800 mm |
| Weight | 2350 KG |
Pictures of Steel Bar Bending Machine:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.