CE ISO Subway Dry Mix Shotcrete Machine Diesel Driven Gunite Mixer

Price Negotiable

Price: negotiation

MOQ: 1 Set

Delivery Time: 5-8 work days

Brand: Silk

Product Description

Best performance diesel driven Gunite Machine Cost tunnel/subway use

Gunite Machine Cost

Problem solution of Gunite Machine Cost:

The rotor, discharging elbow or feeding pipe is blocked	Defective jiggle hose assembly	Reassemble, pay attention to the O-ring
The drill does not turn in the direction indicated by the arrow	The phase connection of the power supply is incorrect	Phase modulation by reversing switch

Parameters of Gunite Machine Cost:

Technical	Parameters
Model	PZ-5	PZ-6	PZ-6F	PZ-7	PZ-9/WSP
Throughput(m3/h)	5-5.5	6	6-7	7	9
Transport Distance (Tidal Spray) (m)	200	200	200	200	200
Applicable Material (Cement/Sandstone) Ratio	1:3～5	1:3～5	1:3～5	1:3～5	1:3～5
Applicable Material (Water/Ash) Ratio	≤0.4～0.45	≤0.4～0.45	≤0.4～0.45	≤0.4～0.45	≤0.4～0.45
Aggregate size (mm)	φ20	φ20	φ20	φ20	φ20
Working Pressure (MPa)	0.2～0.4	0.2～0.4	0.6～0.8	0.6～0.8	0.6～0.8
Feeding height (m)	1.1	1.1	1.1	1.1	1.1
Rotor speed (r/min)	11	11	11	11	11
Motor Power (KW)	5.5	5.5	7.5	7.5	7.5
Motor speed (r/min)	960	960	960	960	960

Operation Method of Gunite Machine Cost:
After the preparation work is finished, the mixing material can be added to the machine. The machine operator should first open the main valve, the valve of the upper air duct opens 1/3 circles, and then adjust the air pressure of the lower air duct (to the cyclone) to about 0.05-0.1 MPa (depending on the delivery distance). Then the sprayer opens the nozzle valve and gives the wet rock surface. At this time, the operator can start the machine and start shotcreting. Now the working pressure is about 0.2-0.4 MPa. According to the water-cement ratio of mixtures and the length of conveying distance, after adjusting and determining the wind pressure to the cyclone, the upper air pipe valve is opened again until there is no more material leakage at the machine outlet.

Pictures of Gunite Machine Cost: