18 Kw I Beam Bending Machine Tunnel Construction Equipment
Cold Steel Accurate Radian Angle Bending Machine New Technology
Angle Bending Machine
Use Skills of Angle Bending Machine:
1. No one is allowed to stand within the rotation radius of the bending steel and on both sides of the fuselage feed. The semi-finished products should be piled up neatly.
2. Bending long section steel, special support should be set up, supporting the section steel should work according to the command of the operator, not arbitrary push and pull.
3. It is forbidden to bend more than the i-steel cold bending machine specified type of steel, such as bending without cold drawing or rust with steel, must wear protective goggles.
4. The processed steel members are placed neatly according to the positioning management requirements, and the pad is placed flat.
5. After the work is finished, cut off the power supply, and clean the work site and I-steel cold bending machine, do a good job of the maintenance of the hydraulic I-steel cold bending machine, the rust in the pit seam is forbidden to dig with your fingers.
Parameter of Angle Bending Machine:
| Parameters/Name | LWGJ-300 I-steel cold bending machine |
| Maximum bending area | 250 cm2 |
| Bending speed | 6-6.2 m/min |
| Bending limit | S=345 MPa |
| Specification of machine | 25# |
| Working pressure of hydraulic system | ≤16MPa |
| Hydraulic cylinder propulsion speed | 1-10 mm/s |
| Hydraulic cylinder jacking force | 50 T |
| Effective stroke of hydraulic cylinder | 300mm |
| Rated oil pump pressure | 16 Mpa |
| Reducer type | 42# |
| Driving power | 5.5*2 |
| Totol power | 18 kw |
| Diamension(L*W*H) | 2800*1600*1800 mm |
| Weight | 2350 KG |
Pictures of Angle Bending Machine:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.