MIKIM Floating Fish Pig Feed Pellet Making Machine 260mm 550KG/ H
new design floating fish feed pellet making machine manufacturing extruder processing equipment plant
Picture of Automatic pet food extruder machine:
Stainless steel, this line is with reasonable design and with high automation; The screws are made
by alloy steel, with building block system structure and self-cleaning function.
Advantages of cat feeding machine:
1. Simple structure, easy to clean and maintain.
2. Spare parts are easy to change, less cost for rollers and dies.
3. Simple operating, just 1 or 2 workers are OK.
4. Be able to change new die and rollers faster to save time to produce pellets.
5. Small and light weight, which can be used in home,small farm and light industrial.
6. Visibility to viewing the material during pelleting is the best way to fix problems.
Model | Voltage | Power | Dia diameter | Capacity | Pellets size | Packing size | Weight |
MK125 | 220V/380V | 3KW | 125MM | 80-100kg/h | 3-10mm | 750*320*650mm | 100kg |
MK150 | 220V/380V | 3KW | 150MM | 100-150kg/h | 3-10mm | 750*350*650mm | 160kg |
MK210 | 380V | 7.5KW | 210MM | 200-300kg/h | 3-10mm | 1000*430*950mm | 230kg |
MK260 | 380V | 11KW | 260MM | 400-600kg/h | 3-10mm | 1200*500*1070mm | 360kg |
MK300 | 380V | 18.5KW | 300MM | 700-800kg/h | 3-10mm | 1270*520*1070mm | 450kg |
MK360 | 380V | 22KW | 360MM | 800-1000kg/h | 3-10mm | 1270*520*1070mm | 500kg |
MK400 | 380V | 30KW | 400MM | 1000-1200kg/h | 3-10mm | 1470*600*1150mm | 585kg |
1: Add oil into gearbox before start.
2:Double-check the belt and the screws before operation.
3:Clean up the rest after use to prevent damage to the machine.
Notice
1, Iron or stones cannot be put into the griller.
2:Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to.
Application of animal feed pellet machine
Final animal feed pellets
Advantages of cat feeding machine:
1. Simple structure, easy to clean and maintain.
2. Spare parts are easy to change, less cost for rollers and dies.
3. Simple operating, just 1 or 2 workers are OK.
4. Be able to change new die and rollers faster to save time to produce pellets.
5. Small and light weight, which can be used in home,small farm and light industrial.
6. Visibility to viewing the material during pelleting is the best way to fix problems.
Matters need attention
1. The new machine for the first time must be run or otherwise can't be used normally.
2. When the pellet machine is working, don't reach into the input hopper by hand. If necessary, you can use a stick to help.
3. Before the machine is turned on, you need to add a little mixture before starting. When the machine is shut down, please leave a little mixture in the machine to prevent the roller and the template idling.
4. When the machine is working, and the phenomenon of stuck happens, should immediately stop and make the roller pressed to the bolt loose, and then restart the machine.
5. Each time the work is completed, the bolt of adjusting roller must be released.
6. If the machine is used for a certain period of time or squeeze out a certain amount of pellets and the pellets are made into pieces or the pellets are broken, the template should be turned to the bottom, and 2%-4% water should be added to the mixture.
7. Please often check the belt tightness to prevent the emergence of low yield, belt slippery and so on.
8. Before starting, firstly add gear oil to the gearbox reaching to 2/3 of the horizontal axis. Pellet machine in the first use should work in low load for 40 hours or so, and then replace the gearbox gear oil, 100 hours after the regular replacement. All bearings should be regularly filled with grease.
9. Particle machine works continuously and then the motor fever reaches to 70 degrees Celsius, it is a normal phenomenon.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.