Grade 5 Titanium Alloy Strip Coils For Aerospace, Medical
Ti-6Al-4V / Grade 5 / Ti-6-4 / R56400
Titanium Strips And Coils
Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. The alloy is castable and is utilized "as cast" in sporting goods.
The wrought material is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favourable corrosion properties are required. The alloy is available as castings, wire, bar, plate, sheet, forgings, rings, and billet.
Hot and Cold Rolled Coils /Sheets
| Item | Dimension(T x W x L) |
| Slit to strips as requested width | |
| Hot Rolled Coil | (3.0~<4.75) × (1000~1500) × L |
| (4.5~12.7) × (1000~2000) × L | |
| Cold Rolled Coil | (0.1~<0.3) × (150~600) × L |
| (0.3~<2.0) × (1000~1280) × L | |
| (2.0~3.0) × (1000~1280) × L |
Chemistry Requirements: % Maximum unless given as a range.
| N | C | H | Fe | O | Al | V | Y | Ti |
| 0.05 | 0.08 | 0.125 | 0.40 | 0.2 | 5.5-6.75 | 3.5-4.5 | 0.005 | Balance |
Minimum Tensile Properties:
| Condition |
UTS ksi (Mpa) |
0.2%YS ksi (MPA) |
% El. | % RA* |
| As specified (shape) | 130 (895) | 120 (828) | 10 | 25 |
| Solution Treated and Aged | 160 (1103) | 150 (1034) | 10 | 20 |
| Castings | 130 (895) | 120 (828) | 6 | 10 |
Typical Tensile Properties:
| Condition |
UTS ksi (Mpa) |
0.2%YS ksi (MPA) |
% El. | % RA* |
| Annealed | 145 (1000) | 132 (910) | 18 | 40 |
| Solution Treated and Aged | 161 (1110) | 141 (970) | 15 | 45 |
| Castings | 145 (1000) | 130 (895) | 5 | 15 |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties mayor may not be attainable in all circumstances.
* %Ra not required by all specifications
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.