Fully Automatic Face Mask Manufacturing Machine 40-50 Pcs/Min For Kf94 Mask

1. Technical Data

The below data might be a little changeable upon field conditions and manpower.

2. Scope of Buyer’s Responsibility

The ambient temperature is required to be at room temperature.

The humidity requirement is 40% -80%. No dew condensation should be installed.

Power supply grid fluctuation: ± 5%, and the ground wire of the grid meets international requirements. In areas with a voltage amplitude of more than 5%, an electronic automatic voltage stabilization and current stabilization device should be installed.

There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitting stations (or relay stations) around the installation site.

Ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid having a large number of machine tools and equipment nearby. Equipment space requirements must be smoke-free and dust-free, and avoid dusty working environments such as metal polishing.

Air pressure: ≥0.6MPa.

In some environments, antistatic flooring and shielding should be installed.

Machine Photo