100G QSFP28 1310nm 20km Transceiver Fiber Optic Transceiver Module
Price:
Negotiable
MOQ:
1
Delivery Time:
5-8 working days
Brand:
Optowix
Product Description
100Gbps QSFP28 Transceiver, Single Mode, 20km Reach
Features
- Compliant to 100G Lambda MSA 100G LR1-20
- Full-duplex transceiver module
- 4x25.78125Gbps NRZ electrical interface(CAUI-4)
- 106.25Gbps PAM4 based on a cooled EML TOSA transmitter
- 106.25Gbps PAM4 PIN Receiver
- 4W maximum power dissipation
- Hot-pluggable QSFP28 form factor
- Maximum link length of 20km on G.652 SMF with KP-FEC
- Duplex LC receptacles
- Built-in digital diagnostic functions
- Operating case temperature range: 0 to 70°C
- Single 3.3V power supply
- RoHS compliant (lead free)
Applications
- 100G Lambda 100G LR1-20
Standards
- QSFP28 MSA
Ordering Information
| Part Number | Product Description | |||||||||||||||||||||
| MK1Q-13TC | 100G QSFP28 1310nm 20km, 0°C~+70°C | |||||||||||||||||||||
Description
- The 100G LR1-20km QSFP28 optical transceiver, 100G QSFP28 LR1-20 is designed for using in 100-Gigabit Ethernet links up to 20km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA ,100G Lambda 100G LR1-20 and CAUI-4(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.
- The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps (PAM4) optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 20km links.
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | -0.3 | 3.6 | V |
| Input Voltage | Vin | -0.3 | Vcc+0.3 | V |
| Storage Temperature | Ts | -20 | 85 | ºC |
| Case Operating Temperature | Tc | 0 | 70 | ºC |
| Humidity (non-condensing) | Rh | 5 | 85 | % |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V |
| Operating Case temperature | Tc | 0 | 70 | ºC | |
| Data Rate Per Lane | fd | 106.25 | Gb/s | ||
| Humidity | Rh | 5 | 85 | % | |
| Power Dissipation | Pm | 4 | W | ||
| Link Distance with G.652 | D | 20 | km |
Electrical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | |||||||||||||||||||||||
| Differential Input Impedance | Zin | 90 | 100 | 110 | ohm | |||||||||||||||||||||||
| Differential Output Impedance | Zout | 90 | 100 | 110 | ohm | |||||||||||||||||||||||
| Differential Input Voltage Amplitude1 | ΔVin | 1600 | mVp-p | |||||||||||||||||||||||||
| Differential Output Voltage Amplitude2 | ΔVout | 900 | mVp-p | |||||||||||||||||||||||||
| Note: 1. Differential input voltage amplitude is measured between TxnP and TxnN. 2. Differential output voltage amplitude is measured between RxnP and RxnN. |
||||||||||||||||||||||||||||
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |||||||||||||||||
| Transmitter | |||||||||||||||||||||||
| Centre Wavelength | λc | 1304.5 | 1317.5 | nm | |||||||||||||||||||
| Side-mode suppression ratio | SMSR | 30 | dB | ||||||||||||||||||||
| Average launch power | Pout | -0.2 | 6.6 | dBm | |||||||||||||||||||
| Optical Modulation Amplitude(OMA outer) | OMA | 2.8 | 6.8 | dBm | |||||||||||||||||||
| Transmitter and dispersion eye closure(TDECQ) | TDECQ | 3.6 | dB | ||||||||||||||||||||
| Extinction Ratio | ER | 3.5 | dB | ||||||||||||||||||||
| Average launch power of OFF transmitter | -30 | dB | |||||||||||||||||||||
| Receiver | |||||||||||||||||||||||
| Centre Wavelength | λc | 1304.5 | 1317.5 | nm | |||||||||||||||||||
| Receiver Sensitivity in OMA outer | RXsen | -7.6 | dBm | 1 | |||||||||||||||||||
| Average receive power | Pin | -10 | 6.6 | dBm | |||||||||||||||||||
| Receiver Reflectance | -26 | dB | |||||||||||||||||||||
| LOS Assert | -13 | dBm | |||||||||||||||||||||
| LOS De-Assert – OMA | -11 | dBm | |||||||||||||||||||||
| LOS Hysteresis | 0.5 | dB | |||||||||||||||||||||
| Note: 1. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FECs |
|||||||||||||||||||||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Wuhan Optowix Co.,ltd.
Location
Room 403, Unit 1, South Main Building, Phase II, National Geospatial Information Industry Base, Wudayuan Road 5-1, East Lake High-tech Development Zone, Wuhan
Contact Person
Vivian