2200X1800 MM Rotary Table Anti-Slip Mat Material PU Yellow Colour With Steel Nails
2200X1800 MM Rotary Table Anti-Slip Mat Material PU Yellow Colour With Steel Nails
Anti-Slip Mat Introduction
Polyurethane anti-slip mat adopts polyurethane board as the main board, which has the characteristics of high strength, good elasticity, oil and solvent resistance, good low temperature performance and good aging resistance. There are multiple sewage grooves arranged vertically and horizontally on the surface, oil or water can flow into the grooves and be discharged in time, reducing the influence of oil or water on the anti-skid effect. The metal rivets protruding from a certain height and the polyurethane rubber protruding rubber particles with better wear resistance make the utility model have excellent anti-skid performance and long service life, and the elastic rubber plate or resin plate anti-skid pad can also be used. It can effectively reduce the damage to the rotary table and the drilling tool during the operation of the drilling rig.
- Rig rotary table anti-skid mat main board material is PU, PU rubber is most resistance rubber, It is characterized by high strength, good elasticity, oil and solvent resistance, low temperature performance and good aging resistance.
- Specific parameter:
Standard ZP-175, ZP-275, ZP-375, ZP-205
We could accept customized.
- Yellow, it’s safe warning sign.
- Thickness: 30mm25mm
- Material:PU
- Characteristics: Obviously anti-slip effection, with oil channel, can effectively discharge oil and mud, anti-slip pad appearance is beautiful with the color of yellow safety warning mark.
| Material | Polyurethane rubber | Model | D3140 |
| No. | Item | Value | |
| 1 | Shore hardness | 90±2 | |
| 2 | 100% Stress at definite elongation | 5.8Mpa | |
| 3 | 300% Stress at definite elongation | 10.6Mpa | |
| 4 | Tensile Strength | 47Mpa | |
| 5 | Elongation at break | 580 | |
| 6 | Tear Strength (right angle) | 98(KN/M) | |
| 7 | Tear Strength (pants type) | 39(KN/M | |
| 8 | Springback | 36% | |
| 9 | Density | 1.27(g/cm³) | |
| 10 | DIN Abrasion | 50 mm³ | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.