26GHz NYRD-PB-A Flat Radar Level Meter

The NYRD-PB-A flat type radar level meter adopts microwave pulse measurement method, and can be in the range of industrial frequency band normal, low beam energy, can be installed in a variety of metal, non-metal containers or pipelines, liquid, slurry and particle material level of non-contact continuous measurement. Suitable for crystallization, condensation, steam, dust, temperature, pressure change, inert gas and steam. Flat type radar level meter has no harm to the human body and the environment, but also not affected by the proportion of medium, not affected by the change of dielectric constant, do not need the advantages of on-site adjustment, whether for industrial needs, or for the consideration of economic benefits to customers, is a very good choice.

Radar Level Meter Technical Parameter

※ Note: Products can be customized according to the specific requirements of users!

Radar Level Meter Installation requirements

• The radar level meter i s installed at 1 / 4 or 1 / 6 of the tank diameter. Note: The minimum distance f rom the tank wall should be 500 mm Figure 1 : ① Datum plane , ② Containercenteroraxisofsymmetry.
• The to poftheconical tank is flat , which can be in stalledin the middle of the to pof the tank , which can ensure  the measurement to the bottom of the conical tank . As Figure 2
• Gantrydoor installation method : The plastich or nantenna can al so be fixedly installed through the gantry door , As Figure 3

Radar Level Meter Wrong installation

• The conical tank cannot be installed above the inlet  .Note: sunshade and rainproof measures should be taken when installing outdoors. Figure 4 : ① Right, ② Wrong
• When there are obstacles in the tank that affect the measurement, a reflector must be installed to measure normally. Figure 5: ① Right, ② Wrong