PCO 28mm 48 Grams Soda Bottle Preforms Carbonated Beverage Pack

Conventional PET carbonated beverage Pack PCO- 28mm48 grams

product description
The water bottle flank PET bottle blank is a typical injection molding product, which is easy to transport, mostly plastic, uniform texture, good insulation, is a plastic bottle, an intermediate product of a plastic bottle and oil barrel.

Molding principle:

At a certain temperature and pressure, the feedstock is filled in the mold, under the processing of the injection molding machine, processed into a bottle blank having a certain thickness and height corresponding to the mold.

PET material introduction:

Polyethylene terephthalate is the primary variety in thermoplastic polyesters, and English is known as POLYTHYLENE TEREPHTHALATE A referred to as PET or PETP (hereinafter or called PET), commonly known as polyester resin. It is a polycondensate of terephthalic acid with ethylene glycol, which is collectively referred to as a thermoplastic polyester together with PBT, or a saturated polyester. PET is a milky white or a front yellow highly crystalline polymer, and the surface is smooth and lustrous. Wheat resistance, fatigue resistance, friction and size stability, high wear, high hardness, high toughness in thermoplastic; good electrical insulation performance, low temperature effect, but poor resistance is poor. Non-toxic, weather resistance, good chemical, low water absorption, low acid and organic solvent.

Processing equipment:

Injection molding machine, mold, pulverizer, mixture machine, production workshop, air pump.

PET bottle pressure test:

PET bottles are often used in packaging, and the packaging is often stacked during transportation or inventory. At this time, we will take into account the Zenduring pressure to afford the power. During the PET bottle compression test, put the PET bottle in the machine two-horizontal pressure plate, start the PET bottle of Suzhou European instruments, and the two pressure discs will be pressed. When you jump, the instrument automatically stops and automatically saves the data.

The PET bottle routine detection has a thickness detection of bottle wall, compressive detection, and cap opening of fatigue detection. PET manufacturers have their own quality inspection department.

PCO1810

1. Non-Crystallized PCO-1810 Neck-Finish PET Preform

2. Use only Officially approved Graded-A resin

3. Applicable for mineral water PET Bottle

4. PET Bottles for aseptic products

5. Size and Specification fully compliance with international standards

6. Absolute low reject rate in blowing process

7. Diversify PET Preform weights

8. Provide variety of options for customer request interns of weights, neck-finish and colors