Screw Fixing M8 Circular Connector 3Pin 4Pin M8 Field Wireable Connector
| Connector Technical Data | |
| Contacts No. | 3Pin, 4Pin |
| Referance standard | IEC 61076-2-104 |
| Rated current | 3A |
| Rated voltage | 60V |
| Impulse voltage | 1500V |
| Locking system | M8×1.0 screw |
| Tightening torque | Recommend: 0.2Nm, Max: 0.4Nm, Wire screw: 0.1Nm, Cable gland:0.3~0.8Nm |
| Termination | Screw fixing |
| Wire gauge | 0.25²~0.34²(AWG 24~22) |
| Rated temperature | Flexible: -25℃ ~ +80℃ |
| Insulation resistance | ≥100MΩ |
| Contact resistance | ≤5mΩ |
| Over-molding | PA66+GF |
| Contact carrier | PA66+GF |
| Screw nut | Brass, CNC, Nickel-plated |
| Contact | Brass; Phosphor bronze |
| Contacts plating | Au(Gold) |
| O-ring | FKM, NBR |
| Protection degree | IP67 |
| Pollution degree | 3 |
● 3Pin, 4Pin aie available
FAQ
● What is M8 connector?
The M8 connector is used specifically with industrial sensors and features a waterproof 3-pin screw. These connectors come pre-assembled and remain watertight even if submerged. These heavy-duty connectors are typically used in harsh environments.
● What does the coding means on M8 connector?
This coding prevents incorrect mating on products.
● What is a Field Wireable connector?
Field wireable connectors and T-couplers are used to build custom patch cables, provide a quick-disconnect for a device, terminate field devices on an I/O block, or bring multiple sensor signals into one port. Axial, right-angle and T-connectors are available in a variety of sizes and terminal pole configurations.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.