Industrial Grade 10-Axis IMU with 3-Axis Accelerometer Gyroscope Magnetometer Barometer

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: 1 week

Brand: Firepower

Product Description

Industrial Grade 10-Axis IMU with 3-Axis Accelerometer Gyroscope Magnetometer Barometer

Product Functions and Technical Parameters

Composition and Function

The 16488HB multi-degree-of-freedom inertial measurement unit is a complete inertial system featuring:

Three-axis gyroscope
Three-axis accelerometer
Three-axis magnetometer
Pressure sensor

This system measures three-axis angular rate, acceleration, magnetic field, and air pressure parameters. It outputs error-compensated data (including temperature compensation, installation misalignment angle compensation, and nonlinear compensation) through SPI or UART communication protocols.

Main Technical Parameters

Parameter		Test conditions	Minimum value	Typical value	Maximum value	Unit
Gyroscope	Dynamic measuring range			500	2000	°/s
	Zero bias stability	Allan variance, Z-axis		0.8		°/h
		Allan variance, X and Y axis		1.6		°/h
		10 s average (-40 ℃ ~ + 70 ℃, constant temperature), Z-axis		3		°/h
		10 s average (-40 ℃ ~ + 70 ℃, constant temperature), X-axis and Y-axis		6		°/h
	Zero bias	Zero-bias range, Z-axis		±0.07		°/s
		Zero-bias range, X-axis and Y-axis		±0.2		°/s
		Zero-bias change in full temperature range, Z-axis ①		±0.02		°/s
		Zero Bias Change Over Temperature, X and Y Axis ①		±0.06		°/s
		Successive Start Repeatability, Z-axis		0.002
		Successive Start Repeatability, X-Axis and Y-Axis		0.006		°/s
	Day-by-day start repeatability, Z-axis		0.003		/s
	Start repetition day by day, X axis and Y axis		0.009		°/s
	Ffect of linear acceleration on bias		0.002		°/s/g
	Influence of vibration on zero bias, change before and after vibration ②		0.002		°/s/g
	Influence of vibration on zero bias, change before and during vibration ②		0.002		°/s/g
	Scale factor	Scale factor accuracy, Z-axis		0.3		%
		Scale Factor Accuracy, X and Y Axis		0.6		%
		Scale factor nonlinearity, Z-axis		0.01		%FS
		Scale Factor Nonlinearity, X and Y Axis		0.02		%FS
	Angular random walk			0.15		°/ √hr
	Noise density			0.001		°/s/ √Hz
	Resolution			3.052*10-7		/s/LSB
	Bandwidth			200		Hz
Accelerometer	Dynamic measuring range			16	200	g
	Zero bias stability	Allan variance		0.06		mg
	Zero bias stability	10 s average (-40 ℃ ~ + 70 ℃, constant temperature)		0.4		mg
	Zero bias	Zero bias range		2		mg
		Change of zero bias within the whole temperature range, peak-to-peak value ①		4		mg
		Repeatability of successive starts		0.5		mg
		Repeatability is initiated on a daily basis		0.8		mg
		Zero-bias temperature coefficient		0.05	0.1	mg/℃