5.0V 1280*1024px 96PPI 17 Inch Touch Panel 2.9mm TP Thick
Master Touch 17 Inch Touch Panel and LCM Tape Bonding with LCD G170ETN01.0
1. Product Description
Master Touch 17 inch Touch Panel+LCM (Tape Bonding) is the lamination of touch panel and the LCD module. That is, the four sides of the touch panel and the LCD screen are laminated with the glue, and there will be an air layer between the two. The advantages are that the lamination is simpler, the process is more mature, the yield is more stable, and the cost is lower, and it is easy to disassemble.
2. Genaral Specification
2.1 LCD
| Model | G170ETN01.0 |
| Size | 17 inch |
| Resolution | 1280(RGB)×1024 [SXGA] 96PPI |
| Luminance | 350 (Typ.) |
| Contrast | 1000 : 1 (Typ.) |
| Viewing Angles | 85/85/80/80 (Typ.)(CR≥10) |
| Signal System | LVDS (2 ch, 8-bit) , terminal , 30 pins |
| Operating frequency | 60Hz |
| Driving Voltage | 5.0V (Typ.) |
| TFT Thickness | 18mm |
2.2 Touch Panel
| Outline Dimension | 360.5*298.5mm |
| View Area | 338.92*271.34mm |
| TP Thickness | 2.9mm |
| Total | 21.9mm |
| Touch IC | ILI2510 |
| Touch points | 10 |
| Interface | USB |
| TP+LCM Bonding Type | Frame Bonding |
| Operation Temperature | -20℃~70℃ |
|
Storage (cannot exceed 6 months)
|
Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH |
| Temperature: -30~80℃ (After installation) |
| Item |
Content |
| Transparency | 85±10% |
2.4 Electrical Spec.
| ESD Touch Side (Touch) | 4kv |
| ESD Touch Side (Air) | 8kv |
3. Reliability
| Item | Specifications | Remark |
|
High Temperature Operation |
70ºC, 48hrs | -- |
| Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
|
Operating Temperature/ Humidity |
60ºC/90%RH, 500hrs | Non-condensing |
| Thermal Shock |
-30 ~ 80℃, 60 mins/cycle, total 48 cycles |
-- |
4. Drawing
5. Details
6. Inspection
Equipment/materials: light box, ion fan, humidifier, film card, alcohol/ethyl acetate, finger cover, dust-free cloth, Vernier/digital caliper.
Inspection environment: 30cm ± 5cm from the product, temperature: 22 ± 2 ℃; humidity: 40% ~ 70% RH; cleanliness: Level 10000.
Inspection angle: vertical rotation angle: ± 30 °, from top to bottom; horizontal rotation angle: ± 30 °, from left to right.
Inspection illuminance: fluorescent lamp inspection area illuminance: 150
0-1800lux; table lamp inspection area illuminance: 1500-1800lux; It is convenient for internal uniform illumination requirements.
Background color: Black/white.
Inspection time: the inspection time of one piece of product shall not exceed 15 seconds.
7. FAQ
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.