Industrial GG Structure 24 Inch Touch Screen Panel EETI Controller
Master Touch 24 Inch EETI Controller Industrial GG Structure Touch Screen Panel
1. Product Description
Master Touch 24 inch capacitive industrial G+G structure touch screen panel with EETI touch controller IC can support operation with thick gloves ,thick tempered glass and thick PC on the top, mainly used in industrial, medical, outdoor advertising and other equipment. Deep customization including structural, surface treatment such as AG AR AF AB and other special effects are supported.
2. Basic Features
| Item | Feature | Remarks |
| Controller |
EETI80H83 |
- |
| Channel | TX: 34 RX: 54 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | plug and play |
| Power Consumption |
1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
|
| Item | Specification | Unit |
| Viewing Area |
518.8(L)×324.4(W) |
mm |
| Cover Lense O.D. |
546.4(L)×352(W) |
4. Optical Characteristics
| Item | Specification | |
| Transparency | Viewing Area | ≧85% |
| Item | Specification | Unit | ||
| Stacked structure | Cover | 3.0 | mm | |
| LOCA | 0.2 | mm | ||
| ITO | 0.7 |
mm
|
||
| Sensor Glass | ||||
| ITO | ||||
| Sensor Dimension | OD Size | X | 538.8 | mm |
| Y |
343.2 |
mm | ||
6. Drawing
7. Details
8. Advantages of G+G Structure
(1)High transmittance,>85%.
(2)Hard and anti-wear surface.The hardness is 6H.
(3)Excellent corrosion resistance.
(4)Sensitive touch and stable performance.
9. Touch Panel FPC Test Items and Criteria
|
Test Item |
Qty (pcs) |
Touch Panel FPC Test Items and Criteria |
|
Direct PullingTest |
5 |
Test Conditions: 1. Pulling weight: 500g. 2. Pulling speed: 25 mm/min 3. Pulling angle: 90o 4. After test, verify touch panel functionality via test jig Pass Criterion: - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
|
Bending test
|
5 |
Test Conditions: 1. 45 degree bending: 100 times 2. 90 degree bending: 200 times 3. After test, verify touch panel functionality via test jig Pass Criterion : - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
| 5 |
Test Conditions: 1. Flex bending: 30 cycles (Each cycle: 0o -> 180o --> 0o) 2. After test, verify touch panel functionality via test jig 3. bending ф=1 mm Pass Criterion : - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
10. FAQ
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.