When Internal Gear Pump is Operating-  BJVP Internal Gear Pump

Overview:

Among the two gears, the internal gear is connected to the driving shaft and power is transmitted to it. Therefore, the internal gear is the driving gear and the external spur gear is the driven gear. During the rotation of the two gears, they appear to be coming out of mesh at the inlet port. This creates the suction and causes the fluid to enter into the pump. The fluid is completely filled around the crescent seal and the gear spaces. The rotation of gears transfers the fluid from inlet port to outlet port.

Application:

Lubricants, Fuel Oil, Grease, Asphalt, Bitumen, Gluse,Polymer,Resin,Chemical Fiber, Coatings, Detergents, High viscosity product or high temperature product.

Parameters:

Character:

Adjustable clearance, easy satisfied with the changable viscosity ;Enlarged seal chamber for multi type seal interchange ; Enlarged bearing housing for quickly maintenance.

Available Solution:

Packing seal,Mechanical Seal,Cartridge type seal , all kinds of seal types are interchangeable, enlarged bearing housing design for future replacement and quickly maintenance.

Magnetic None Seal pump is also available.

Internal Safety valve , heating jacket,electric heating rod can be supplied.

BJVP can provide a variety of material selection,working scope to meet with application requirement.

Picture: