120v Silicone Oil Pan Heater 2x5 Inch , 50w Heating Pad Silicone

50w 120v Oil Pan Heater Engine Oil Heater Silicone Heater 2inx5in

Silicone Oil Pan Heater Description
The rate for 1-4 quart oil capacity 50 Watt, 120 volts Designed for smaller oil pans and crankcases Pad Dimensions 2" X 5" Universal application Mounts in any position Very flexible and pliable, Has high temp. 3M adhesive on reverse side Plugs into any 120-volt receptacle Oil and acid resistant Keep compressor oil warm Easy to install, as it requires little mechanical ability. Silicone rubber heater usage specification: 1.The silicone rubber heater can’t be man-made damaged, such as using a knife to scribe, or can't pull the power line hardly. 2. It is prohibited to soak in the water strictly, silicone rubber heater can be touched to the water in a short time, but only water droplets. 3. When a silicone rubber heater isn’t in use, you need to unplug the plug. Please wait for the heating plate to cool down before you can store it. 4. Silicone rubber heater can’t be overlapped, otherwise it will cause the overlay temperature is too high, reducing the service life of the heater. 5.In the installation, the silicone rubber heater should be close to the heated object. Also, there should be no gap between the heating plate and the heating object 6.A silicone rubber heater can be worked in the pressure state (keep it close to the heated surface by using an auxiliary plate). Good heat conductivity, its operating temperature should be less than 240 ℃, and the power density up to 3W / c ㎡

Silicone Oil Pan Heater Specifications:

Application of Oil Pan Heater Silicone rubber heating element

Advantages of Silicone Oil Pan Heater 

1. The silicone rubber heaters have the advantage of thinness, lightness, and flexibility
2. It can improve heat transfer, accelerate warming and decrease power under the process of operation. Fiberglass reinforced silicone rubber stabilizes the dimension of heaters
3. The maximum wattage can be made for 2w/square cm
4. The heaters can be made in any size and any shape
5. Inside the heater there are two types of the heating way: one is a resistance wire and another is a heating film.

FAQ
1. How much is the silicone heater?

The price is determined by the size.

2. Why is the silicone heater so cheap?

You are ordering directly from the factory.

3. How can I get some samples?

We are honored to offer you samples .

4. What type of payment do you have available?

TT and L/C are accepted. West Union, PayPal, and Money gram are available.

5. What is the lead time?

The sample is only for 1-3 days, if the mass production, we can discuss your requirement.