Fully Automatic Tension Slitting Machine For PET / BOPP 300meters/Minute
Price:
50000dollars
MOQ:
1 tower
Delivery Time:
four weeks
Brand:
HJ
Product Description
HJ-D1600- III three servo fully automatic tension slitting machine
1, Parameter indicators:
1. Material type: PET, BOPP, BOF, PE, OPP and other rolled materials;
2. Material thickness: 0.012-0.5mm (film); 30-450g (paper)
3. Maximum diameter of raw materials: 1400mm
4. Raw material tube core: 3 "paper tube
5. Maximum width of raw materials: 1600mm
6. Roll surface width: 1650mm
7. Cutting width: 10-1600mm
8. Reeling tube core: 3 "paper tube;
9. Maximum diameter of winding: 600mm
10. Total deviation correction stroke: 150mm
11. Maximum speed: 300 meters/minute
12. Cutting speed: 10-300 meters/minute
13. Total power supply: 18.5KW
14. Total weight: approximately 4800KG
15. External dimensions: 3200 long, 3100 wide, and 1500mm high
- Backup configuration:
| Part Name | Specification and model | number | brand |
| 45 # steel frame | Wall panel net thickness 40mm | 1 pair | |
| 3-inch slip shaft | 2 pieces | ||
| Main traction roller steel rod | φ120*1650mm | 1 piece | |
| Main traction rubber roller polyurethane | φ120*1650mm | 1 piece | |
| Hard alumina guide roller | Φ75*1650mm | 13 pieces | |
| Winding servo | 5.5KW | 2sets | Beauty Department |
| Traction servo | 5.5KW | 1set | Beauty Department |
| drive | 5.5kw | 3units | Shenzhen Hongyuan |
| Waste blowing edge fan | 1.1KW | 1unit | Wuxi |
| bearing | 1batch | HRB | |
| pneumatic components | 1batch | ||
| Ultrasonic correction of deviation | 1 set | bat | |
| Master PLC programmable controller | CPU224XP | 1 piece | Siemens |
| 7-inch true color touch screen | TPC1061Ti | 1 piece | Beijing Kunlun Tongshi |
| proximity switch | 1 piece | Japan OMRON | |
| Low Voltage Apparatus | 1 batch | schneider | |
| switch power supply | S100-24 | 1 piece | mean well |
3, Functional description of each part:
1. Unwinding Department:
1. The unwinding adopts a shaftless pneumatic feeding rack, which is convenient for single person operation. Adopting a special inflatable shaft form, it does not damage the inner wall of the tube core.
2. There are three modes for freely switching the unwinding tension: pressure sensor closed-loop automatic constant tension control mode, pressure sensor free open-loop automatic constant tension control mode, and manual tension.
3. The unwinding diameter is automatically detected by the proximity switch at the unwinding transmission shaft, without the need to input material thickness. The residual unwinding diameter can be set to automatically slow down and stop, making it convenient for the next coil to be received.
4. Equipped with a mechanism for manually adjusting the release and tightening edges, with an adjustment range of ± 10mm.
5. The automatic deviation correction system automatically corrects the edge of the film or paper.
II. Traction Department:
1. The traction roller is driven by a 5.5KW servo motor.
III. Waste edge recycling device:
Use a fan to blow out the waste and waste materials, and the customer will equip a mesh box for collection.
4. Winding mechanism: (The left or right end discharge of finished products is determined by the customer when ordering)
1. Use both upper and lower axes to independently roll the cut material.
2. There is one 5.5KW servo motor with pneumatic expansion shaft for the upper and lower winding shafts. The winding tension is automatically controlled by PLC based on the current coil diameter, so that there is no material thickness factor when multiple slits are cut. All coil end faces are flat, and the flatness of the disc surface is freely selected by the pneumatic pressure roller and the self weight pressure roller for cutting. The tightness of the inner and outer layers of the finished coil is controllable, which is a spiral winding method. As the winding diameter continues to increase, the PLC automatically controls the speed of the winding servo motor to decrease.
6. The slitting knife adopts a round knife for slitting (6 pairs), with an optional air knife (320 yuan per piece)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Ruian Haijing Machinery Co., Ltd.
Location
Feiyun Street, Ruian City
Contact Person
sales