A36 Stainless Steel Angle Bar

40x6mm 50*6mm A36 S235jr Hot Rolled Flat Steel stainless flat bar steel

Stainless Steel Flat Bar Introduction

Flat steel refers to steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular section and a slightly blunt edge. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked sheets. As a finished product, flat steel can be used to make hoop iron, tools and mechanical parts, and it can be used as a building frame structure, escalator and so on.

Compared

Special product specifications. The thickness is 8-50mm, the width is 150-625mm, the length is 5-15m, and the product specification is relatively dense, which can meet the needs of users. It can be used instead of the middle plate and can be directly welded without cutting.
The smoothness of the product surface. In the process, the high-pressure water descaling process is used for the second time to ensure that the surface of the steel is smooth and clean.
The sides are vertical and the water chestnuts are clear. The two-pass vertical rolling in the finishing rolling ensures good verticality of both sides, clear corners, and good edge surface quality.
The size of the product is accurate, with a three-point difference, and the same grade difference is better than the steel plate standard; the product is straight and the shape is good. The finishing rolling adopts continuous rolling process and automatic looper automatic control to ensure that the steel does not pile up and does not pull the steel. good degree. Cold shearing and cutting, high precision in length setting.
The material of the product adopts the national standard, which is the same as the steel plate. Quality and technical standards are organized according to YB/T4212-2010 standards (Q345B/Q235B refer to GB/T1591-94 and GB/T700-06 standards respectively).
advantage
The flat steel is rolled with negative deviation, but it is delivered according to the actual weight, and the utilization rate is 1-5 percentage points higher than that of the steel plate.
Flat steel can be produced with fixed thickness, fixed width and fixed length according to user needs, which reduces cutting for users, saves processes, reduces labor and material consumption, and also reduces processing loss of raw materials, saving time, labor and saving. material. Products have been professionally used in steel structure manufacturing, machinery manufacturing, automobile industry, mining machinery, hoisting machinery and other industrial materials

Stainless Steel Flat Bar Parameter