SUS 201 Stainless Steel Flat Bar 304 316L Hot Rolled JIS DIN

Stainless Steel Flat Bar SUS 201 304 316 316L Hot Rolled Stainless Steel Flat Bar

Stainless Steel Flat Bar Introduction

Flat steel refers to steel with a width of 12-300mm, a thickness of 4-60mm, a rectangular section and a slightly blunt edge. Flat steel can be finished steel, and can also be used as blanks for welded pipes and thin slabs for stacked sheets. As a finished product, flat steel can be used to make hoop iron, tools and mechanical parts, and it can be used as a building frame structure, escalator and so on.

Stainless steel flat steel can be composed of various stress-bearing components according to the different needs of the structure, and can also be used as a connection between components. It is widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container racks and warehouse racks.

Stainless steel flat steel is used as bridges, house frames, fences, power transmission ships, vehicles, etc. in construction projects. The raw material billet for the production of stainless steel flat steel is low carbon square billet, and the finished stainless steel flat steel is delivered in hot-rolled, cold-rolled or hot-rolled state. During the transaction, the side width and side thickness of the stainless steel flat steel should be fully filled in the contract and other documents, as well as other main process matters, such as annealing, solid solution, etc.

Advantage

Flat steel is rolled with negative deviation, but it is delivered according to the actual weight, and the utilization rate is increased by 1 to 5 percentage points compared with the steel plate; The consumption of labor and materials also reduces the processing loss of raw materials, saving time, labor and materials.

Compared with traditional steel plates, it has the following advantages: the product specifications are special. The thickness is 8-50mm, the width is 150-625mm, the length is 5-15m, and the product specifications are relatively dense, which can meet the needs of users. It can be used instead of the middle plate and can be directly welded without cutting; the surface of the product is smooth and clean. The high-pressure water descaling process is used for the second time in the process to ensure that the surface of the steel is smooth and clean; the sides are vertical and the water chestnut is clear. The two-pass vertical rolling in the finishing rolling ensures good verticality of both sides, clear corners, and good edge surface quality; the scale of the product is accurate, the three-point difference, and the same grade difference is better than the standard of the steel plate; the product is straight and the shape is good . The finishing rolling adopts continuous rolling process and automatic looper automatic control to ensure that the steel is not piled up and not drawn. good degree. Cold shearing, high precision in length and length; the product material adopts the national standard, which is the same as the steel plate.

Stainless Steel Flat Bar Parameter