IEC 60068 Humidity Ingress Protection Test Equipment SUS304 Housing

Price Negotiable

Price: Negotiable

MOQ: 1

Delivery Time: Negotiable

Brand: KINGPO

Product Description

IEC 60068 Humidity Ingress Protection Test Equipment SUS304 Housing

IEC 60068 Humidity Chamber

Product information:

This test device can simulate different environment condition.So it is appropriate to test material performance,such as resist heat,resist cold,resist humidity,resist dry. It is designed and manufactured in accordance with the standard requirement of IEC 60068-2-1.1990, IEC60068-2-2.1974 and ect.

Technical parameters:

Model No.	PTH-225
Inner Dimensions WHD (mm)	500750600
External Dimensions WHD (mm)	About 100016201150
Upper temperature limit	+150℃～+200℃
Lower temperature limit	0℃, -20℃, -40℃, -70℃
Humidity range	20％～98％ RH
Humiture precision / uniformity	±0.1℃; ±0.1% RH / ±1.0℃; ±2% RH
Warming up / cooling down time	Warming about 4℃/ MIN; Cooling about 1℃/ MIN
Control panel	South Korea “TEM” series temperature and humidity controller
Compressor	Franceas “Tecumseh” Brand
Cooling method	Air cooling/ water cooling
Heater	Nichrome heater
Humidifier	KD Stainless deviser
Protection device	Overheating,overloading,overpressure, leakage,water-break,cutting off and power phase dislocation protect
Housing materials	SUS304 Brushed or static plastic spraying on steel plates
Inner material	SUS304 Stainless plates
Insulation material	Extra-fine glass wool or Polyurethane foam
Power	220V/380V±10%,50Hz,3P+N+G
standards	Gb10586:Thermal-humidity specification Gb10589:Low temperature specification IEC 60068-2-1.1990, IEC60068-2-2.1974
Testing method	Gb/T2423.1, Gb/T2423.9, Gjb150.4