White PP Fiber Monofilament For Increase Cracking Resistance On The Surface Of Industrial Workshop, Warehouse And Parking Lot

White PP Fiber Monofilament For Increase Cracking Resistance On The Surface Of Industrial Workshop, Warehouse And Parking Lot

PP Fiber Monofilament Introduction

Briture PP Fiber 110F is made of 100% virgin homopolymer polypropylene with form of monofilament type, it is mainly used for concrete and motar reinforcement, anti-cracking.

PP Fiber Monofilament Function

Resist to shrink & crack                                   Increase seepage resistance          Increase friction resistance

Increase freezing & thawing resistance           Improve tendons protection            Replace steel net (using in plastering)

Prevent mortar split and crackle expansion     Increase impact resistance and peeling resistance
 

PP Fiber Monofilament Features

A. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively

B. Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.

C. It with fine economic property: The equivalent diameter of fiber is only p 0.03mm, so the ratio of diameter and surface area is high and on the basis of crackresistance, it can reduce the amount (to about 0.6kg/m3 ).

D. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.

E. It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.

PP Fiber Monofilament Application

1. Be suitable for the water–proof layer, floor, inner & outer wall of industrial and civil construction.
2. Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.
3. Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
4. Be suitable for any mortar projects and fine aggregate concrete projects.

PP Fiber Monofilament Specification

PP Fiber Monofilament Packing:

PP fiber commonly packing: 1kg each PE bag, 10kgs each woven bag,11.2tons/1x20`FCL,25.6tons/1x20`FCL;

Can be packed according to your requirements

Certificate: