White Polypropylene Concrete PP Mesh Fiber For Projects Construction
Price:
USD2.2-2.6/KGS
MOQ:
1000KGS
Delivery Time:
2-3 work days
Brand:
Briture
Product Description
White Polypropylene Concrete PP Mesh Fiber For Projects Construction
PP Mesh Fiber Decription:
PP mesh fiber is a kind of polypropylene particles as raw materials, through special processing made of fibers, they are interwoven into a network. The addition of this fiber in concrete or mortar can effectively control the early plastic shrinkage and settlement cracks, improve the seepage resistance, crushing resistance and impact resistance of concrete, enhance the toughness and wear resistance of concrete, thus extending the life of buildings and reducing maintenance costs.
PP Mesh Fiber Function:
1. Increase seepage resistance
2. Prolong endurance
3. Improve steel protection
4. Increase cracking resistance
5. Increase fire resistance
6. Strengthen spurt & fatigue
7. Improve tensile, bending & folding strength
8. Improve plastic deformity
9. Strong acid & alkali resistance and good endurance
PP Mesh Fiber Applying instruction:
1. Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
4. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolonged to make fiber completely mixed.
5. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3minutes after the addition of polypropylene fiber-mesh.
PP Mesh Fiber Specification:
| Raw Material | 100% virgin polypropylene | Fiber type | Fibrillated Mesh |
| Crack Elongation (%) | 10 min. | Melting Point (℃) | 160 |
| Density | 0.91 | Tensile Strength (Mpa) | 560 min. |
| Fiber Diameter (mm) | 0.035 | Fiber length (mm) | 12,19,38,54... |
| Elastic Modulas (Mpa) | 3500 min. | Width (mm) | 5 |
| Alkali & Acid resistance | Strong | Water-Absorbency | No |
Certificate:
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Briture Co., Ltd.
Location
Room 1306, Block C, Blue Ocean building, Qianshan Road, Hefei, China.
Contact Person
Linda Qiang