Serial Interface 4-Inch SPI TFT LCD Module SPI 4 IO Driver Port 480x320 Points
4 inch SPI Serial Interface TFT Module Product Introduction
Model No.: SFTM400XM-7173AT
SFTM400XM-7173AT is a 4 inch LCD module adopting a 4-wire SPI communication method, with a driver IC of ILI9488, a resolution of 480x320, and touch function (optional). This module includes an LCD display screen, backlight control circuit, and touch screen control circuit.
- 4.0-inch color screen,support 65K color display,display rich colors, 480X320 resolution, with touch function.
- Using the SPI serial bus, it only takes a few IOs to illuminate the display.
- Eeasy to expand the experiment with SD card slot and touch pen.
- Compatible with Arduino R3/Nano/Mega controller boards, which will improve your project operation.
- Provide a rich sample program and underlying driver technical support.
Feature
| Product: | 4inch SPI Module |
| Module Structure: | TFT+RTP+SPI PCB |
| Resolution: | 480x320 Dots |
| Interface: | 4 Wire SPI |
| Touch Screen: | With Resistive Touch Screen |
| Driver IC: | ILI9488 |
| Outline Dimension: | 61.74 x 108.04 (mm) |
| Active Area: | 51.84 x 86.40 (mm) |
| Pin Number: | 14 Pins |
| Operating Temp.: | -20℃~70℃ |
| Storage Temp.: | -30℃~80℃ |
| Working Voltage: | 3.3V / 5V |
| Power Consumption: | ~90mA |
| Weight: | ~71g |
Hardware Configuration
The hardware circuit of this LCD module consists of three main parts: LCD display control circuit, touch screen control circuit, and backlight control circuit.
1, The LCD display control circuit is used to control the pins of the LCD, including control pins and data transmission pins.
2, The touch screen control circuit can control the touch screen touch response and touch coordinate reading (touch screen optional).
3, The backlight control circuit is used to control the backlight brightness and dimming. Of course, if backlight control is not required, this circuit can be omitted and the backlight control pin can be directly connected to a 3.3V power supply.
4 inch SPI Serial Interface TFT Module Product Drawing
Pin Definition
| No | Pin | Description |
| 1 | VCC | LCD Power supply positive (3.3V~5V) |
| 2 | GND | LCD Ground |
| 3 | CS | LCD Chip Select |
| 4 | RESET | LCD RESET |
| 5 | DC/RS | LCD Register/Data Selection Signal |
| 6 | SDI(MOSI) | LCD SPI Bus write data signal |
| 7 | SCK | LCD SPI Bus clock signal |
| 8 | LED |
Backlight control signal (high-level illumination, if no control is required, please connect to 3.3V) |
| 9 | SDO(MISO) | LCD SPI bus read data signal (if not needed, it can be disconnected) |
|
The following are touch screen pins. If they do not have touch or do not require touch function, they can be disconnected |
||
| 10 | T_CLK | Touch screen SPI bus clock signal |
| 11 | T_CS | Touch screen chip selection signal |
| 12 | T_DIN | Touch screen SPI bus input signal |
| 13 | T_DO | Touch screen SPI bus output signal |
| 14 | T_IRQ | Touch screen touch interrupt signal |
4 inch SPI Serial Interface TFT Module Product Image
Factory Facilities and Certifications
Contact Us
We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.