0.96 Inch IPS TFT Display 80x160 Pixels ST7735 Driver IC SPI Interface
** Datasheet Download **
0.96 inch TFT SPI interface Product Introduction
Despite their small size, small TFT LCD screens are widely used in industries such as smart wearable devices, instruments, digital cameras, electronic tags, communication devices, and smart homes. This 0.96-inch small-sized TFT display SFTO096JY-7183AN adopts SPI interface (serial peripheral interface), which is a high-speed, full duplex, synchronous communication bus that only occupies four lines on the chip pins, saving space for chip pins and PCB layout.
SFTO096JY-7183AN is a full-color TFT LCD display with a diagonal size of 0.96 inches and a resolution of 80x160. This module supports SPI interface, making it very convenient for users to program and use. The module size of SFTO096JY-7183AN model is 13.5x27.9x1.5 mm, and the active area size is 10.8x21.7mm. The IPS technology used in the product ensures that users can experience the panoramic view of the screen and an excellent user experience from any direction.
Feature
| No. | Item | Contents |
| 1 | LCD Size | 0.96inch(Diagonal) |
| 2 | Display Mode | Normally black |
| 3 | Resolution | 80(H)RGB x 160(V) |
| 4 | Dot pitch | 0.135 (H) x 0.1356(V) mm |
| 5 | Active area | 10.8(H) x 21.7 (V) mm |
| 6 | Module size | 13.5(H) x 27.9(V) x1.5(D) mm |
| 7 | Color arrangement | RGB Vtertical stripe |
| 8 | Interface | SPI 4 LINE |
| 9 | Drive IC | ST7735S |
| 10 | Luminance(cd/m2) | 260 (TYP) |
| 11 | Viewing Direction | All View |
| 12 | Backlight | 1 White LED |
| 13 | Operating Temp. | -20℃~ + 70℃ |
| 14 | Storage Temp. | -30℃~+ 80℃ |
0.96 inch TFT SPI interface Product Drawing
Electrical Characteristics
| Parameter | Symbol | Min | Typ | Max | Unit |
| Logic Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Analog Supply Voltage | VCC | 2.6 | 2.8 | 3.3 |
-- |
| Input Current | Idd |
-- |
20 |
-- |
mA |
Backlight Characteristics
| Item | Symbol | Min | Typ | Max | Unit | Condition |
| Forward Voltage | Vf | 3.0 | 3.2 | 3.4 | V |
-- |
| Forward Current | If |
-- |
20 |
-- |
mA |
-- |
| Operating Life Time |
-- |
-- |
40000 |
-- |
Hrs |
Pin Definitions
|
Pin |
Symbol |
Description |
| 1 | LEDA | Anode of Backlight |
| 2 | GND | Ground |
| 3 | RESET | LCM Reset pin |
|
4 |
D/C |
Register select pin D/C=’ 1’ : Display data. D/C=’0’ : Command data. |
| 5 | SDA | Serial data input |
| 6 | SCL | Serial clock pin |
| 7 | VDD | Power supply for Analog(2.8V-3.3V) |
| 8 | CS |
Chip select pin(“Low” enable) |
Optical Characteristics
| Item | Symbol | Measuring Conditions | Min. | Typ. | Max. | Unit | |
| Response Time | Tr+Tf | θ = 0o φ = 0o | 25 oC |
- |
30 | 40 |
ms |
|
Viewing Angle |
θ |
φ = 0o | 25 oC | - | 80 | - |
Deg |
| φ = 180o | 25 oC | - | 80 | - | |||
|
θ |
φ = 90o | 25 oC | - | 80 | - | ||
| φ =270o | 25 oC | - | 80 | - | |||
| Contrast Ratio | CR | - | 25 oC | 800 | - | - | |
|
Color of CIE Coordinate |
White | X | 25 oC | 0.304 | 0.306 | 0.308 |
- |
| Y | 25 oC | 0.325 | 0.327 | 0.329 | |||
| Red | X | 25 oC | 0.608 | 0.610 | 0.612 | ||
| Y | 25 oC | 0.331 | 0.333 | 0.335 | |||
| Green | X | 25 oC | 0.279 | 0.281 | 0.283 | ||
| Y | 25 oC | 0.531 | 0.533 | 0.535 | |||
| Blue | X | 25 oC | 0.144 | 0.146 | 0.148 | ||
| Y | 25 oC | 0.136 | 0.138 | 0.140 | |||
| Transmittance (with polarizer) |
5.09 |
% | |||||
0.96 inch TFT SPI interface Product Image
Reliability Test Conditions
| No | ITEM | CONDITION | CRITERION |
|
1 |
High Temperature (Non-Operating Test) | 80℃*240Hrs |
No Defect Of Operational Function In Room Temperature Are Allowable (.IDD of LCM in Pre-and Post-Test Should Follow Specification
|
|
2 |
Low Temperature (Non-Operating Test) | -30℃*240Hrs | |
|
3 |
High Temperature/Humidity Non Operating Test | 60℃*90%RH*240Hrs | |
|
4 |
High Temperature Operating Test
|
70℃*240Hrs | |
|
5 |
Low Temperature Operating Test | -20℃*240Hrs | |
| 6 | Thermal Shock Test | -20 ℃(30Min)<>70 ℃(30Min) * 10CYCLES |
Facilities and Certifications
Contact Us
We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.