1.9" IPS TFT LCD Display | 176x320 SPI/Parallel Interface | ST7789P3 Driver | -20℃~70℃ Industrial
Industrial-Grade Performance for Demanding Applications
The SFTO190JY-7267A-CT is a 1.9-inch IPS TFT LCD module engineered for industrial controls, medical devices, and portable instrumentation. Featuring an ST7789P3 driver and IPS hard-screen technology, it delivers 178° wide viewing angles, 900:1 contrast ratio, and 55% NTSC color gamut – ensuring reliable visibility in extreme environments (-20°C to +70°C).
Key Differentiators for Design Engineers
(1) Dual-Interface Flexibility
-
Supports both SPI (4-wire) and 8-bit 8080 parallel interfaces for seamless integration with ARM Cortex-M/R, Raspberry Pi Pico, and other embedded platforms.
-
Dedicated constant-current backlight driver pins (LED+/LED-) extend lifespan to 40,000 hours (Page 8).
(2) Ruggedized Construction
-
Validated through -30°C~80°C storage, ±8kV ESD protection, and 60cm drop tests (IEC 60068-2-32 compliant).
-
Optional chemically strengthened cover glass (≥6H hardness) with ≥85% light transmission (Page 5).
(3) Precision Optical Performance
-
Active area: 22.7 × 42.72 mm | Pixel pitch: 0.1335 mm | RGB vertical stripe matrix.
-
Factory-calibrated white point (CIE 1931 x=0.302/y=0.325) for medical/industrial color accuracy (Page 12).
Engineering Resources
-
Pre-tested initialization code for STM32/Arduino platforms (Page 18-19).
-
Mechanical drawings, timing diagrams, and optical test reports (BM-7 standard) available.
-
Optional multi-touch solution (CST816D IC via I²C) with OCA lamination.
EU/US Compliance Assurance
◾ Meets RoHS (EU 2015/863), REACH SVHC, and Halogen-Free directives.
◾ Packaging complies with EU 2025/40 recyclability mandates (effective 2026).
Mechanical Dimensions
Product Information
| Features | Details | Unit |
| Display Size(Diagonal) | 1.9’’ | Inch |
| LCD type | IPS TFT | - |
| Display Mode | Normally black | - |
| Resolution | 170 RGB(H) x 320(V) | Pixels |
| Viewing Direction | ALL | - |
| Module size | 25(W) x 49.33(H) x 2.11(T) | mm |
| Active Area | 22.7(W) x 42.72(H) | mm |
| Pixel Size | 0.1335(W) x 0.1335(H) | mm |
| Color arrangement | RGB Vtertical stripe | - |
| Interface | SPI/Parallel | - |
| Display Colors | 262K | - |
| Driver IC | ST7789P3 | - |
| With or Without Touch Panel | Without | - |
| Operating Temperature | -20℃~70℃ | ℃ |
| Storage Temperature | -30℃~80℃ | ℃ |
| Surface brightness | 350 | cd/m2 |
CTP Specification
| Category | Parameter | Specification |
|
General |
Structure | Cover Glass + ITO Sensor Film (G+F) |
| Outline dimension | 31.0 (H) x 55.33 (V) x 3.64 (T) mm | |
| Cover Lens Strengthening | Chemically Strengthened | |
| Cover Lens Surface Hardness | ≥6H (Pencil Hardness) | |
| Light Transmission Rate | ≥85% | |
| Operation Temperature | -20℃ ~ +70℃, ≤90% RH | |
| Storage Temperature | -30℃ ~ +80℃, ≤90% RH | |
|
Electrical |
Interface | I2C |
| Touch IC | CST816D | |
| Power Supply Voltage (VDD) | 2.8V ~ 3.3V | |
| Host Resistance (SDA/SCL) | Configurable on Main-board | |
| Touch Point | Single Touch, multi-touch optional | |
| Environmental | Operating Conditions | Customizable |
|
Surface Properties |
Surface Ink | Clear type |
| Surface Treatment | Customizable | |
| LCD-TP Lamination | AIR, OCA Bonding Optional | |
| Compliance | Material Standards | RoHS & Halogen-Free Compliant |
Asolute Maximum Ratings
| Item | Symbol | Min. | Max. | Unit |
| Logic Supply Voltage | IOVCC | -0.3 | 4.0 | V |
| Analog Supply Voltage | VCC | -0.3 | 4.6 | V |
| Operating temperature | Top | -20 | 70 | ℃ |
| Storage temperature | Tst | -30 | 80 | ℃ |
DC Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCC | 2.5 | 2.75 | 3.3 | V |
| Logic Supply Voltage | IOVCC | 1.65 | 1.8 | 3.3 | V |
| Input high voltage | VIN | 0.7*IOVCC | - | IOVCC | V |
| Input low voltage | VIL | GND | - | 0.3*IOVCC | V |
| Output high voltage | VOH | 0.8*IOVCC | - | IOVCC | V |
| Output low voltage | VOL | GND | - | 0.2*IOVCC | V |
| Input Current | IIN | - | 20 | - | mA |
Backlight Characteristic
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Forward Voltage | VF | - | 3.2 | - | V |
| Forward Current | IF | - | 80 | - | mA |
| Power dissipation | Pd | - | 256 | - | mW |
| LED Life Time(25 ºC) | - | 30000 | 40000 | - | Hrs |
Pins Definitions
| Pin.No | Symbol | Description | |||||||||
| 1 | GND | Ground | |||||||||
| 2 | VCC | Power supply for Analog | |||||||||
| 3 | IM2 |
|
|||||||||
| 4 | IM1 | ||||||||||
| 5 | RESET | LCM Reset pin | |||||||||
| 6 | CS | Chip select pin (“Low” enable) | |||||||||
| 7 | DC/SCL | Serial clock pin. | |||||||||
| 8 | WR/RS | Register select pin. | |||||||||
| 9 | RD | Read enable in 8080 MCU parallel interface. | |||||||||
| 10 | SDA | SPI interface input/output pin | |||||||||
| 11-18 | DB0-DB7 | MCU parallel interface data bus. | |||||||||
| 19 | SDO | SPI interface output pin. | |||||||||
| 20 | LED+ | Backlit anode | |||||||||
| 21-24 | LED- | Backlit cathode | |||||||||
| 25 | GND | Ground | |||||||||
| 26-29 | NC | NC | |||||||||
| 30 | GND | Ground |
Product Image
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.