T-Shirt 1kg 5kg Tpu Polyurethane Dtf Powder Hot Melt Adhesive White Powder
T-Shirt 1kg 5kg Tpu Polyurethane Dtf Powder Hot Melt Adhesive White Powder
Activation Temperature Range: DTF TPU hot melt adhesive powder has a specific activation temperature range within which it melts and becomes adhesive. The activation temperature can vary depending on the specific formulation of the adhesive powder. It's important to adhere to the recommended temperature range to ensure proper bonding between the design and the fabric.
Heat Press Process: The activation of DTF TPU hot melt adhesive powder is typically achieved through a heat press process. A heat press machine is used to apply heat and pressure to the printed DTF film and fabric sandwich, activating the adhesive powder and transferring the design onto the fabric.
Powder Application Techniques: There are different techniques for applying DTF TPU hot melt adhesive powder onto the printed DTF film. Some common methods include manual sprinkling or sifting the powder evenly over the design or using specialized equipment designed for powder application.
DTF Powder For DTF Product Description
| Property | Criterion |
| Appearance | White powder |
| Composition |
TPU |
| Density |
1.20±0.02 g/cm³ |
| Melt Point |
90-115 ℃ |
| Melt Index |
28±8 g/10min |
| Powder size range |
0-80 μm |
|
80-200 μm |
|
|
150-250 μm |
Powder For DTF Technical Parameters:
| Bonding parameters (for reference only) | Temperature |
140-160℃ |
| Press |
0.3-0.6 kg/cm2 |
|
| Time |
5-15 S |
|
| Washing Resistance | 40℃ | Excellent |
| 60℃ |
General |
|
| 90℃ | / |
Packaging and Storage Conditions:
| Packaging | 20KG / bag, packed in PE inner bag+kraft bag |
| Storage Conditions | Stored in dry unopened packaging at room temperature for 12 months. High temperature and pressure will cause agglomeration. The trays cannot be double-pressed. |
Application of DTF Powder
Transfer the Design: Carefully place the DTF film with the applied powder onto the fabric, ensuring proper alignment and positioning. The printed side with the powder should be in direct contact with the fabric.
Heat Press Process: Once the DTF film is positioned on the fabric, transfer the assembly to a heat press machine. Follow the manufacturer's instructions for the recommended temperature, pressure, and time settings. The heat and pressure will activate the adhesive properties of the DTF powder, allowing it to bond with the fabric.
Cooling and Peeling: After the heat press process, allow the fabric to cool down before peeling off the DTF film. Wait for the fabric to reach a suitable temperature according to the instructions provided by the adhesive powder manufacturer. Then, carefully peel off the DTF film, leaving the transferred design on the fabric.
Post-Processing: Depending on the specific adhesive powder and manufacturer's recommendations, there may be additional post-processing steps. These may include curing the transferred design, washing the fabric to remove any residue, or applying protective coatings to enhance durability.
Characteristics of hot melt adhesive powder
1.100% ink absorption rate,
2. The powder is clean,
3. The pattern is bright in color,
4. Very soft to the touch.
5. Second on-site delivery.
Why choose us
1. own factory, efficient technical equipment, several production lines
2. excellent service and short delivery times
3. we are an environmentally friendly adhesive company, to ensure the environmental performance of raw materials
4. professional R&D team, a new type of enterprise integrating production, R&D and sales
FAQ
Q1) . How about your conventional package and the MOQ of your adhesive powder?
We have 1kg,2kg,5kg and 20kg per bag,MOQ is 20kg.
Q2) . What type of hot melt adhesive powder do you have?
We have PA, TPU, EVA and PES hot melt adhesive powder.We can accord your application to give your suitable type.
Q3). What is your Particle size?
0-80um, 80-200um , 150um-250um ,200um-400um
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.