Video Monitoring Pneumatic Drop Test Chamber For Battery Safety
Battery Drop Test Chamber For Battery Safety Test
Introduction:
battery drop test chamber is used to test the drop impact performance of large, heavy-duty packaging products by simulating real surface, edge, and corner differences. It is mainly used to test the anti-drop ability of packaging products during transportation, loading and unloading, thereby improving packaging design
Meet standard:
IEC 62133-2017
Feature:
This machine adopts a pneumatic structure, the test sample is placed in a special fixture (adjustable stroke) and clamped firmly, press the drop button, the cylinder is released, the test sample will be tested in a free fall, the drop height can be adjusted up and down, and the height is attached The ruler can know the drop height of the test sample, and a variety of drop floors are available for selection, which can meet different test standards.
| NO | Item | Parameter |
| 1 | Model | XW-6001C |
| 2 | Drop height | 300~1500mm(adjustable) |
| 3 | Experimental methods | Faces, edges,and corners fall in all directions |
| 4 | Drop floor media | A3 steel plate (acrylic plate, marble slab) |
| 5 | Test the load | 0~3kg |
| 6 | Maximum size ofthe specimen | 200mm x200mm |
| 7 | Drop panel size | D900*H1800mm |
| 8 | Motor power | 0.75 kW |
| 9 | Machine weight | 250KG |
| 10 | Drop mode | Pneumatic drop |
| 11 | Lifting method | Electric lifting |
| 12 | Use a power source | 220 volts 50 Hz |
| 13 | Safety devices | Fully enclosed explosion-proof device |
Details:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.