Temperature Control Lithium Battery Short Circuit Tester GB 31241-2014
Temperature Control Battery Short Circuit Tester For Cell Lithium Battery
Introdution:
Battery short circuit tester is used to test whether the battery will explode and catch fire when a certain resistance is short-circuited under high temperature, and at the same time display the maximum short-circuit current through the relevant instrument.
Meet Standard:
GB 31241-2014 YD 1268-2003
UL1642IEC62133-2012
UN38.3
GB/T 19521.11-2005
YDB 032-2009
GB/T 8897.4-2008(IEC 60086-4:2007) MT/T 1052007
GB/T 18287-2013
YD/T 2344.1-2011
SJ/T111691998(UL1642:1995) SJ/T 11170-1998(U12054:1997)
GB/T21966-2008IEC62281:2004)
Options:
Place the fully charged battery in an environment of 55°C±5°C. After the surface temperature of the battery reaches 55°C±5°C,leave it for 30 minutes, then connect the positive and negative terminals of the battery with wires, and ensure that all external
resistances are at 80°C. ±20mΩ, monitor the battery surface temperature change during the test. When one of the following two situations occurs, the test is terminated:
(1) The battery surface temperature drops 20% lower than the peak value;
(2) The short circuit time reaches 24 hours
The battery should not fire or explode, and the maximum temperature should not exceed 150°C.
Specifications:
| NO | Item | Parameter |
| 1 | Inner box size | 500x500x600mm (width x depth x height) |
| 2 | Temperature range | RT+10~80°C |
| 3 | Temperature control accuracy | +0.5°C |
| 4 | Temperature uniformity | +2°C |
| 5 | Heating time | (5+1)°C/min |
| 6 | Internal material | SUS304 stainless steel plate, thickness 1.2mmroom temperature ~ 80C |
| 7 | Temperature control of thetemperature control box | temperature sensor:0C~1000C |
| 8 | Temperature acquisition | AC220V 50Hz~60Hz |
| 9 | Working voltage | located on the top of the box |
| 10 | Air supply port | located on the top of the box |
| 11 | Window size | 250X200mm, tempered explosion-proof glass with a thickness of 20mmand a stainless steel protective net is installed in front ofthe glass to increase safety performanceand facilitate disassembly andcleaning |
| 12 | Voltage acquisition range | 0-100V |
| 13 | Maximum short-circuit current | 1000A |
| 14 | Power supply | AC220V,50/60Hz |
| 15 | Weight | 200KG |
Details:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.