Lithium-ion battery charging and discharging test cabinet is a kind of equipment used to test Li-ion batteries. It can simulate various working states of lithium battery during charging and discharging, and also test and evaluate the electrical performance of the battery.
2.5 A light-emitting diode is mounted on each of the battery fixtures as an operational status display, and when the discharge is completed, it can be used to indicate battery capacity sorting.
2.6 Real-time detection each battery voltage. When charging, first constant current charging, when the battery voltage reaches the set value, it will smoothly switch to constant voltage charging, and when the set time or current termination condition is satisfied, the charging ends. When constant current discharging, the battery voltage is lower than the set value, the discharge ends and the corresponding battery indicator lights up.
2.7 With power-down protection function, the original workflow can continue to run after the power back.
Structure Of Equipment
| Model | XW-02 | |||
| Number Of Device Channels | 256 channels | |||
| Overall Dimension | Width 514.4mm× Depth 1684mm× Height 1840mm | |||
| Color | Standard off-white or off-black (customizable) | |||
| Jig Form | 65 Blue & white split clamp | |||
| Fixture Spacing | 150mm Battery spacing | |||
| Support Battery Specifications | Battery length: 0-180mm, width: 0-150mm, thickness: 8-15MM; | |||
| Battery tab center distance: 0-150mm | ||||
| Working Power Supply | Three-phase 5 wire system AC380V±10%,50HZ | |||
| Power Factor | 0.99@ 220VAC, full load, grid THDu ≤2% | |||
| Current Harmonic | <5%@ 220VAC, full load, grid THDu ≤2% | |||
| Power Consumption | ≤15 KW | |||
| Work Environment | Indoors, temperature is 10-30℃ under air convection. | |||
| Heat-Dissipating Method | Air cooling | |||
Piture:
Have questions about our products or want to discuss a custom order? Our team is ready to help you.