OD122mm large inertia motor rotor and stator Custom Various models motor core High quality silicon steel rotor and stato

All specifications can be customized,Welcome your inquiry! 

Motor Core For Industrial Control 130 servo stator and rotor stack

 Considering the cost, the notch is designed as straight groove, and the motor temperature rise is considered.

The material of 0.35mm is used to achieve relatively low motor temperature.

The rotor is 10 pole Surface mounted type, with 0.5mm material. The rotor has 10 weight reducing holes,

which can be increased or reduced according to the customer's demand for inertia; the keyway with deflection

of 1.5 ° is designed on the inner hole, which can realize the wrong pole design of 3 ° production in 2 sections of rotor.

       Considering the cost, using 0.5mm material to design the notch as a straight slot, compared with 0.35mm material,

the temperature rise will be relatively higher, but the cost of iron core is the best.The rotor is 10 pole Surface mounted

type, with 0.5mm material. The rotor has 10 weight reducing holes, which can be increased or reduced according to the

customer's demand for inertia; the keyway with deflection of 1.5 ° is designed on the inner hole, which can realize the

wrong pole design of 3 ° production in 2 sections of rotor.