UV UVV Type Corrugated Flute Cassette Single Facer SF-360E/320E
SF-360E/320E Cassette Single Facer
Product Description:
The main structure and frame are
made of cast iron, up to the thickness of200mmequipped with independent gear box and carton drive with submerged
lubrication system to avoid noise and run stable.
Achieved by the method of vacuum suction, it equipped with high pressure air blower as well as a muffler, with adjustable of air blowing rate, to keep flute profiles stable under high speed
Positive pressure design, low energy losing, helps the pressure applied uniformly on medium paper and makes it attaches well on the corrugating roll, to get a good flute profile.
Product Features:
1- Cassette model single facer
2- Change Roller easily within 10 mins
Product Parameters:
| effective width: | 2200mm |
| design speed: | 150m/min |
| temperature range: | 160-200℃ |
| air source | 0.4-0.9Mpa |
| steam pressure | 0.8-1.3Mpa |
| corrugated flute: | UV type or UVV type |
Roller Diameter Parameters:
| diameter of up corrugated roller: | ￠320mm |
| diameter of pressure roller: | ￠269m |
| diameter of glue roller: | ￠268mm |
| diameter doctor roller: | ￠153mm |
| diameter doctor roller: | ￠400mm |
Powered motor parameters
| Component | unit | Rated voltage | Working standard |
| main frequency drive motor | 30KW | 380V 50Hz | Continuous (S1) |
| suction motor | 15KW | 380V 50Hz | Continuous (S1) |
| glue reducer linear actuator | 30W | 24V | short(S2) |
| glue gap motor | 200W*2 | 380V 50Hz | short(S2) |
| glue pump motor | 2.2W | 380V 50Hz | Continuous (S1) |
| glue frequency motor | 3.7KW | 380V 50Hz | Continuous (S1) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.