Austenitic 2205 Stainless Steel Sheet 500 Width For Construction
Austenitic Steel Sheet 2205 Stainless Steel Sheet 500 Width For Construction
Product Introduction:
Compared with austenitic stainless steel, the advantages of duplex stainless steel are as follows:
(1) The yield strength is more than twice as high as that of ordinary austenitic stainless steel, and it has enough plastic toughness required for molding. The wall thickness of the tank or pressure vessel made of duplex stainless steel is 30-50% less than that of the commonly used austenite, which helps to reduce the cost.
(2) It has excellent stress corrosion rupture resistance. Even the duplex stainless steel with the lowest alloying content has higher stress corrosion rupture resistance than the austenitic stainless steel, especially in the environment containing chloride ions. Stress corrosion is a prominent problem that ordinary austenitic stainless steel is difficult to solve.
| Grade | 2205 |
| Standard | ASTM, JIS, GB, AISI, DIN, BS,EN |
| Width | 300-2000mm, according to customer requirements |
| Finish | Cold rolled, Hot rolled |
| Thickness | 0.3mm–100mm |
| Length | 500-12000mm, according to customer requirements |
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 2205 (S31803) | Min Max | - 0.030 | - 2.00 | - 1.00 | - 0.030 | - 0.020 | 21.0 23.0 | 2.5 3.5 | 4.5 6.5 | 0.08 0.20 |
| 2205 (S32205) | Min Max | - 0.030 | - 2.00 | - 1.00 | - 0.030 | - 0.020 | 22.0 23.0 | 3.0 3.5 | 4.5 6.5 | 0.14 0.20 |
Product Show
Packaging Details&Shipping
Standard seaworthy export packing:
3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock.
1. Export seaworthy packing: a water proof paper + an inhibitor film + a steel sheet cover with steel edge protectors and sufficient steel straps
2. Packaging detail:as customer's requirements.
F&Q
Q: ARE YOU FACTORY OR TRADER?
A: Lichuang Special Steel is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A: Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Circles / Discs, Decorative Stainless Steel Sheets.
Q: HOW TO GET A SAMPLE?
A: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q: HOW TO VISIT YOUR FACTORY?
A: Most of the main cities have flights to Wuxi; you can take flight to Wuxi Shuofang International Airport.
If you come from Shanghai, it will take 2 hours by flight (every day 5 flights).
If you come from Hongkong, it will take 1 hour by flight (every day 1 flight around noon time).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.