3556294 3240386 5016706 Hydraulic Pump Seal Kit hyd Cylinder Ring Arm Boom

3556294 3240386 5016706 KIT SEAL KITHYD CYLINDER RING parts

Item Qty Part Specifiion Description
1 4 375-2467 Flange Locknut Before assembly, apply Loctite C5A copper anti-size to the threads.
Torque to 70 5 N m (52 4 lb ft).
2 1 4W-9977 Clamp As Torque to 13.6 1.2 N m (120.4 10.6 lb in).
3 1 243-2504 Turbine Clamp As Use the following procedure to tighten the turbine clamp assembly:
1. Torque to 18 N m (159 lb in).
2. Loosen to 1 to 2 turns .
3. Again, torque to 13.6 1.2 N m (120.4 10.6 lb in).

GroundedNote: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear the diagnostic codes when the original diagnostic code is corrected. Note: Ensure that the diagnostic code is active and that the diagnostic code indior is active.Test Step 1. CHECK THE SWITCH

(1) Measured at the No. 2 flow meter
(2) Measured at the pressurized flow meter
(3) Leakage = Converter Inlet Flow − Converter Outlet FlowLockup Clutch Test
Table 10
Lockup Clutch Test Input Speed (1200 30 rpm)
Torque Converter Outlet Flow (1) 133 L (35 US gal)
Lockup Clutch Solenoid Energized
Impeller Clutch Solenoid Energized
Torque Converter Inlet Flow(2)
Turn the key switch and the disconnect switch to the OFF position.
Disconnect the machine harness from the switch.
With the switch in the OFF position, measure the resistance of the switch contacts from the N.C. signal contact 1 to switch common contact 2.