2435816 2435818 2435820 2436225 2440953 2440954 2440955 2440957 2440958 2440959 2440960 2440961 2440962 2440964 2440965

2435816 2435818 2435820 2436225 2440953 2440954 2440955 2440957 2440958 2440959 2440960 2440961 2440962 2440964 2440965

LOAD HAUL DUMP R1300 R1300G R1300G II

 

Compatible equipment models: 2440958:

BACKHOE LOADER 426C 436C

 

Illustration 1 g06041674
Table 1
Specifiion for Engine Oil Cooler Bypass And Cooling Jet Sequence Valves
Item Qty Part Specifiion Description
1 - - Tighten the plug to 100 15 N m (74 11 lb ft).
2 2 6B-9202 Spring Length under test force is 68.263 mm (2.6875 inch).
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).toto
Free length after test is 112.7 mm (4.44 inch).
- - - Cooling jet sequence valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Cooling jet sequence valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
3 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
- - - Oil cooler bypass valve must open with a pressure difference of 180 20 kPa (26 3 psi).