SH120 SH200 SH160 Hydraulic Vacuum Pump Seal Kit Sumitomo Excavator

SH120 SH200 SH160 Hydraulic Vacuum Pump Seal Kit Sumitomo Excavator

SH120 SH200 SH160 CONTROL VALVE SEAL KIT Excavator Hydraulic main pump seal kit excavator spare parts SUMITOMO

SEAL KITS---
BOOM CYL SEAL KIT . ARM CYL SEAL KIT . BUCKET CYL SEAL KIT
MAIN PUMP SEAL KIT . HYDRAULIC PUMP SEAL KIT . PIOLVE VALVE SEAL KIT.
GEAR PUMP SEAL KIT VALVE SEAL KIT .PUMP PLUNGE SEAL KIT .
.CONTROL VALVE SEAL KIT. SWING MOTOR SEAL KIT .. TRAVEL MOTOR SEAL KIT .
ADJ CYL SEAL KIT. CENTER JIONT KIT BREAKER SEAL KIT

Oil Seal -- TC TB TCV TCN DB DC DCY TC4Y ISPID BABSL

Piston seal : SPGW SPGO SPG SPGA NCF ODI OSI OUIS OHM OKH DAS , OK SELA OUY D-8

Rod Seal : IDI IUH ISI IUIS D-2 D-3 D-6
　
U Seal : UPI UPH USH USI V99F V96H UN

Buff Seal : HBTS HBY HBTTS D-14

Wiper Seal : DKB DKBI DKBI3 DKBZ DKI , DWI DKH DWIR DSI LBI LBH VAY DH ME-2 ME-8

Wearing Ring : WR KZT RYT

　
Rotary Seal : ROI D-14 SPN

Back Up Ring : N4W BRT-PTFE BRT-NYLON BRT2 BRT3 BRT-G BRT-P BRN2 BRN3

O Ring : Oring Kit P series G series AS series S series M 1.5 series M 2.0 series M 1.9series M 2.4 series

M 3.0 series M4.0 series

Piston seal : SPGW SPGO SPG SPGA NCF ODI OSI OUIS OHM OKH DAS , OK SELA OUY D-8

Rod Seal : IDI IUH ISI IUIS D-2 D-3 D-6

Valve Pusher Floating oil seal Bushing hydraulic cylinder seals cylinder seal kits

(P2-13) Engine coolant temperature
(P2-30) Sensor return
(P2-56) Intake manifold air temperature
(P2-62) Fuel temperature
Illustration 5 g01241529
Terminal loions at the P1 ECM connector for the engine temperature sensors
(P1-26) Engine oil temperature
Illustration 6 g01241538
Connector for the temperature sensors
(1) Sensor signal
(2) Sensor return
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the temperature sensors.
Check the allen head screw for each of the ECM connectors for the proper torque. Refer to Troubleshooting, "Electrical Connectors - Inspect" for correct torque values.
Check the harness and wiring for abrasions and for pinch points from each sensor to the ECM. Expected Result:All connectors, pins, and sockets are completely coupled and/or inserted. The harness and wiring are free of corrosion, of abrasion, and of pinch points.Results:
OK - The connectors and wiring appear to be OK.