6mm 2X Black Dual Wall Adhesive Heat Shrink Tubing For Automotive Oil Pipe Protection
6mm 2X Black Dual Wall Adhesive Heat Shrink Tubing For Automotive Oil Pipe Protection
SBRS-(2X)QF Adhesive-lined Heat-shrinkable Tubing is specially designed for Automotive Oil-pipe Protection, providing preventive protection to break line, fuel line, hydraulic line and other metal pipeline which is subject to bending or clamping during manufacturing, installation or operation.
Features
• Semi-rigid outer jacket for mechanical damage prevention
• Adhesive inner layer for sealing against moisture and corrosion
• Easy installation
• High strength bonding, the adhesive layer is hard to be peeled
off from pipeline
• Continuous operating temperature:-45°C-105°C
• Fully shrink temperature:^125°C
Dimensions
| Size | Expanded | After Recovery | Standard Package | ||
| mm | Internal Diameter | Internal Diameter | Total Wall Thickness | Adhesive Thickness | Spool Length |
| Min(mm) | Max(mm) | Nom(mm) | Nom(mm) | IVI/ | |
| 06.0 | 6 | 4.5 | 1.20±0.20 | 0.20±0.05 | 300 |
| 08.0 | 8 | 6.1 | 1.30±0.20 | 0.20±0.05 | 200 |
| 011.0 | 11 | 7.1 | 1.30±0.20 | 0.20±0.05 | 200 |
| 013.0 | 13 | 9.8 | 1.30±0.20 | 0.20±0.05 | 100 |
| 015.0 | 15 | 11.5 | 1.30±0.20 | 0.20±0.05 | 100 |
Technical Data
| I Property | Test Method | Standard Performance I |
| Tensile Strength(MPa) | ASTM D2671 | 512 |
| Elongation(%) | ASTM D2671 | N300 |
| Longitudinal change | ASTM D2671 | -10%~+10% |
| Tensile strength after aging(MPa) | 120°CX24h | S12 |
| Non-deformability | 140°C, 10min,2kg/cm2 ,loaded 5min | <60% |
| Low-temperature impact | ASTM D 746 | -35°C,no cracking |
| Impact resistance to fall | Room temperature&-40°CX30min, impacted by a weight of 200g, 0.5m high | no cracking |
| Stress-crack resistance | ASTM D 1693 | no cracking |
| Chemical reagents resistance: 0.1 mol/L H2SO4l0.1 mol/L NaOH, Brake fluid, Engine oil, Gasoline | No abnormal in appearance | 20°C,120hr |
Adhesive
| Property | Test Method | Standard I |
| Water Absorption | ASTM D570 | <0.5% |
| Sofening Point(°C) | ASTM E28 | 105+5 |
| Strength of pearing(AL) | ASTM D 1000 | 120N/25mm |
| Strength of pearing(PE) | ASTM D 1000 | 80N/25mm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.