33mm Adhesive Lined Shrink Tubing ROHS 600v Heavy Wall
Black 33mm Heavy Wall Adhesive Lined Heat Shrinkable Tubing ROHS
Heavy wall heat shrinkable tuing provides maximum reliability for insulation and protecting cable joints and terminations
• Flame retardant
• Withstands severe mechanical requirements
• Rated for 600V,90幻 ,continuous use
• Optional thermplastic adhesive liner for complete environmental protection and insulation
• Continuous Operation
•Temperature:-45t€ to 125°C
• Shrink Temperature:! 25°C
Selection Table
| Size | As Supplied | After Recovery(mm) | Standard Length (m/pc) | |||
| Internal Diameter | Internal Diameter | Out Layer Wall Thickness | Adhesive Layer Wall Thickness | Total Wall Thickness | ||
| 9.0/3.0 | m 9.0 | W 3.0 | 2.0±0.20 | 0.35±0.10 | 2.30 ± 0.25 | 1.22 |
| 13.0/4.0 | N 13.0 | W 4.0 | 2.4±0.20 | 0.35±0.10 | 2.75 ± 0.25 | 1.22 |
| 20.0/6.0 | m 20.0 | W 6.0 | 2.5±0.20 | 0.40±0.10 | 2.90 ± 0.25 | 1.22 |
| 28.0/9.0 | N 28.0 | W 9.0 | 2.5±0.20 | 0.40±0.10 | 2.90 ± 0.25 | 1.22 |
| 33.0/10.2 | M 33.0 | W 10.2 | 3.2±0.25 | 0.40 ±0.10 | 3.60 ± 0.25 | 1.22 |
| 38.1/12.0 | m 38.1 | W 12.0 | 3.4±0.20 | 0.60 ±0.15 | 4.00 ± 0.35 | 1.22 |
| 43.2/12.7 | 3 43.2 | W 12.0 | 4.3±0.20 | 0.70 ±0.35 | 5.00 ± 0.35 | 1.22 |
| 51.0/16.0 | M 51.0 | W 16.0 | 4.3±0.20 | 0.70±0.35 | 5.00 ± 0.35 | 1.22 |
| 70.0/21.0 | M 70.0 | W 21.0 | 4.3 ±0.20 | 0.70 ±0.35 | 5.00 ± 0.35 | 1.22 |
| 85.0/25.0 | N 85.0 | W 25.0 | 4-3 ±0-20 | 0-70 ±0-35 | 5-00 ± 0.35 | 1.22 |
| 105.0/30.0 | m 105.0 | W 30.0 | 4.3 + 0.20 | 0-80 ±0-35 | 5.10+0.35 | 1.22 |
| 120.0/39.0 | m 120.0 | W 39.0 | 4.3±0.20 | 0-50±0-35 | 5.10± 0.35 | 1.22 |
| 140.0/42.0 | N 140.0 | w 42.0 | 4.3±0.20 | 0-60 ±0-35 | 5-10± 0.35 | 1.22 |
Note: Tubing without adhesive is available upon request
| Technical Date | Hot Melt Adhesive Property | ||||
| Property | Test Method | Stantard 1 | Property | Test Method | Stantard 1 |
| Tensile Strength(Mpa) | ASTM D2671 | >10.4 | Water Absorption | ASTM D570 | <0.2% |
| Elongationf%) | ASTM D2671 | &300 | Sofening Point | ASTM E28 | 95P |
| Peel Strength(PE) | ASTM D 1000 | 120N/25mm | |||
| Density(g/cm3) | ASTM D792 | 1.2 | |||
| Peel Strength(AL) | ASTM D 1000 | 80N/25mm | |||
| Longitudinal changef%) | UL224 | w±10 | |||
| Elongation after agingf%) | UL224158TX168hrs | & 200 | |||
| Heat shock | UL224 225寸 X4hrs | No cracking | |||
| Dielectric strength(kv/mm) | IEC243 | M20 | |||
| Volume resistivity(Q • cm) | IEC93 | >1 x1014 | |||
| Water absorption!%) | ASTM-D570 | <0.5 | |||
FAQ
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex, UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train. We will use good packing and ensure the safety. We will be responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock products in 3 work days.
If without stock,or stock is not enough, we will check the delivery time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have over 10 years OEM experience.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.