HDPE High Speed 1 Layer Automatic Extrusion Blow Molding Machine for Plastic Tube Accessory

SLBU series:

1. When the fully automatic blow molding machine is being repaired, press the touch screen fault repair button to ensure safe maintenance. If you need to manually observe the action of each individual cavity, please pay attention to the position of the robot. At the same time, be sure to clear the role of separate buttons to ensure that the malfunction caused unnecessary trouble.

2. When the high-low pressure air source switch is turned on, it must be operated slowly to prevent the gas source from flowing too fast. The dirt is blown into the solenoid valve. At the same time, the exhaust valve is opened for 30 seconds to ensure the air is clean.

3. After the normal operation of fully automatic blow molding machine, any part of the body do not reach into the machine to avoid injury to the robot. If the machine has abnormal noise, it can be observed after deceleration.

4: this machine is suitable for the production of 200ML- 10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speed faster, run more smoothly.

5: hydraulic system: full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable. And equipped with imported hydraulic, pneumatic and electrical parts of famous brand, it has stable equipment performance and simple handling.