25L Blow Molding Mold Auto Deflashing Chemical Barrel Casting Moulds
Blow Mold 25L Plastic Chemical Barrel with Auto-deflashing System for Blow Molding Machine
1: this machine is suitable for the production 25L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speedF aster, run more smoothly
2.Mold material: SS2316, Alu+BeCu, P20.
3,Machine characteristics:
For packaging from 20 to 30 liters capacity.
Electric system: PLC and human-machine interface
Hydraulic system: YUKEN hydraulic valves and pump
Plastisizing system: Effective, energy-saved screw
Extruding system : Invertor and harden surface gear box
Clamping unit : Adopting linear slideway with precision up to um grade
Parison injecting: Single hydraulic cylinder without non-synchronization
4. For blow Machine
| SPECIFICATION | SLBC-80 | |
| MATERIAL | PE,PP,EVA,ABS,PS | |
| MAX CONTAINER CAPACITY | L | 30 |
| OUPUT(DRY CYCLE) | PC/HR | 600 |
| MACHINE DIMENSION (LxWxH ) | MM | 5300x3000x3500 |
| TOTAL WEIGHT | TON | 11T |
| CLAMPING UNIT | ||
| CLAMPING FORCE | KN | 200 |
| PLATEN OPENING STROKE | MM | 350-850 |
| PLATEN SIZE(WxH) | MM | 750x780 |
| MAX MOULD SIZE(WxH) | MM | 600x1000 |
| MOLD THICKNESS | MM | 360-500 |
| EXTRUDER UNIT | ||
| SCREW DIAMETER | MM | 80 |
| SCREW L/D RATIO | L/D | 25 |
| MELTING CAPACITY | KG/HR | 120 |
| BARREL HEATING POWER | KW | 16 |
| NUMBER OF HEATING ZONE | ZONE | 4 |
| EXTRUDER MOTOR RATED POWER | KW | 30 |
| DIE HEAD | ||
| NUMBER OF DIE HEATING ZONE | ZONE | 4 |
| POWER OF DIE HEATING | KW | 15 |
| MAX DIE-PIN DIAMETER | MM | 250 |
| POWER | ||
| MAX DRIVE POWER | KW | 42 |
| TOTAL POWER | KW | 82 |
| FAN POWER OF SCREW | KW | 3.2 |
| AIR PRESSURE | MPA | 0.8-1.2 |
| AIR CONSUMPTION | M3/MIN | 0.8 |
| AVERAGE ENERGY CONSUMPTION | KW | 32 |
| ACCUMULATOR CAPACITY | L | 6 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.