Carbon Sheet Metal V Groove Cutting Machine Horizontal Hydraulic Slotting
Carbon sheet Stainless steel Horizontal CNC Hydraulic V-groove Slotting machine
Machine Discriptions,
This equipment is fully CNC Servo V-Groove Machine for metal sheet.
It adopts advanced CNC controller and innovative design with the advantages of high processing precision, simple operation, no noise, no vibration and so on.
It is widely used in the sheet metal V-groove, U-groove and other irregular groove processing (including stainless steel, aluminum, aluminum plate, copper, Carbon steel, and other special plates).
Particularly.It is applicable to the V-groove processing of sheet metal before bending.
Main feature and special function,
1. Bevelling available ;
2. Available to groove from one side of plate to end, and also start cut at another side;
3. The minimum distance from the side of plate to the first groove line is 6mm;
4. The minimum size of plate to groove is 100x100mm;
5. Grooving from one point to another point exactly;
6. Power saving;
7. Environmental protection.
The performance characteristics,
1.1 Sheet metal slotting machine frame and the beam are all box-shaped. After finite element optimization design, the all-steel welding is tempered to eliminate residual stress.
1.2 Metal sheet V slotting machine adopt Taiwan EASYCAT or SYNTEC industrial-control controller and closed-loop servo system: easy, flexible, fast, efficient and low noise.
1.3 CNC controller, supporting full-automatic operation, 3-blades can run simultaneously significantly improves the grooving efficiency.
1.4 Stainless steel V grooving machine with 4 control axes (X,Y1,Y2,Z axes), hydraulic hold-down device, the gantry and tool holder make round-trip move together when working.
1.5 V-groove machine use ball screw & roller heavy-duty guide rail.
1.6 This machine equipped with automatic lubrication system: low wear, fine processing, ensuring machining accuracy and high dynamic response characteristics.
1.7 The compressed air/water blowing and cooling system not only prevents the cutting waste from scratching the surface of the workpiece, but also improves the life of the knifes.
Main Technical parameters,
| Thickness range for plate to be processed | 0.6mm-4mm(stainless steel) |
| Thickness range for plate to be processed | 0.6mm-4mm(carbon steel) |
| Max. processed depth each time | 0.6mm |
| Max. processed depth | 2.5mm |
| Length for plate to be processed | 6000mm |
| Width velocity | 1250mm |
| V type trough margin minimum distance | 6mm |
| Forward Cutting speed | 0-70m/min |
| X axis returning speed | 0-70m/min |
| Y axis minimum unit set | 0.01 mm |
| Y axis minimum positioning accuracy | ±0.05mm |
| Z axis minimum unit set | 0.01 mm |
| Positioning accuracy | ±0.05mm |
| Z axis stroke | 50mm |
| X-axis inverter/servo motor | 5.5KW |
| Z axis servo motor | 1KW |
| Y1,Y2 axis servo motor | 1KW |
| Hydraulic system | 1.5KW/8L/10MPa |
| Knife | 3sets |
| 1500*4000 | 8500mm*2350mm*1700mm |
| Pneumatic pressure | 6Map-8Map |
| Weight | 12.5T |
| Main power | 380V/50HZ/3Phase |
Main parts instruction,
| CNC system |
Taiwan SYNTEC or ESAYCAT 19” HD LCD Touch screen |
| Servo units(X,Y,Z) |
EASYCAT Taiwan DELTA Taiwan |
| Cooling system | Water mist cooling pump |
| Knife | South Korea alloy knife head |
| Ball screw | TBI Taiwan |
| Linear guiding | HIWIN Taiwan |
| Gear & rack | YYC Taiwan |
| Hydraulic system | Brand of Taiwan |
| Wire cables | Germany IGUS |
| Low voltage electrical appliances | Schneider |
| Limited switch |
Brand of Japan or Germany |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.