Replace V4043A1705 Honeywell Two Port Zone Valve
Replace V4043A1705 Honeywell Two Port Zone Valve
Specifications OF Honeywell Two Port Zone Valve
Dimensions (in.): 4 in. high x 3 23/32 in. wide x 2 3/8 in. deep
Dimensions (mm): 102 mm high x 94 mm wide x 60 mm deep
Frequency: 60 Hz
Approvals, Underwriters Laboratories Inc.: UL Listed: File MH11826
Operating Humidity Range (% RH): 5 to 95% relative humidity, non-condensing.
Voltage: 120 Vac; Power Consumption--9.6 VA
Parameters Of Honeywell Two Port Zone Valve
| Item | Replace V4043A1705 Honeywell Two Port Zone Valve |
| Size: | 3/4" |
| Width (Inches): | 3-23/32" |
| Depth (Inches): | 2-3/8" |
| Height: | 4" |
| Material: | Brass |
| Flow Capacity (Cv): | 3.5 |
| Position: | Normally Closed |
| Voltage: | 120v |
| Capacity: | 3.5 Cv |
| Wiring: | 18" Leads |
| Body Pattern: |
2-Way Straight-Through |
| Hertz: | 60 |
| Max Ambient Temp (°F): | 125°F |
| Max Close-Off PSI: | 20 psi |
| Temperature Range (F): | 40°F - 200°F |
| Max Temp (F): | 200°F |
| Min Temp (F): | 40°F |
| Connection Type: | Threaded |
| Valve Action: | Spring Return to Close |
| Power Consumption: | 9.6 VA |
| Nominal Timing: | 15 Seconds |
| Static Pressure: | 125 psi |
| End Switch: | No |
Honeywell Two Port Zone Valve Features
- Manual opener for valve operation on power failure; valve returns to automatic position when power is restored.
- All models may be installed without disassembling the valve.
- Compact construction for easy installation.
- Motor may be replaced without removing the valve body or draining the system.
Note: Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.
Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.