Replace V4043A1705 2 Port Heating Valve

Replace V4043A1705 2 Port Heating Valve

Give your customers control of their home water supply with these two-way, on-off line voltage valves. The V4043A1705 2 Port Heating Valve consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water in closed loop hydronic systems.

V4043A1705 2 Port Heating Valve Specifications

• Pipe Size: 3/4"
• Body Pattern: Two-way, Straight-through
• Capacity: 3.5 Cv
• De-Energized Position: Normally Closed
• Maximum Close-off Pressure (psi): 20 psi
• Fluid Temperature Range: 40 F to 200 F
• Electrical Connections: 18 in. leads
• Power Consumption: 9.6 VA
• Nominal Timing (sec, min): 15 Seconds
• Valve Action: Spring return to close
• Maximum Ambient Temperature (F): 125F
• Dimensions: 4 in. high x 3 23/32 in. wide x 2 3/8 in. deep
• Type: 2 position
• Static Pressure: 125 psi
• Voltage: 120 Vac

V4043A1705 2 Port Heating Valve Parameters

Features

• Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored.
• All models may be installed without disassembling the valve.
• Motor may be replaced without removing the valve body or draining the system.
• Suitable for heating and cooling applications

Note: Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.

Two way on-off line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.