11.5t Roofing Sheet 50hz Double Layer Roll Forming Machine 380v Plc
11.5T Double Layer Roofing Sheet 50Hz 380V PLC Double Layer Roll Forming Machine
1. Brief introduction of Double Layer Forming Machine
Double layer forming machines for roofing and cladding sheets , with the greatest advantage is one double layer machine can make two design sheets.
usually, one layer forming machine or single layer forming machine only make one roofing design.
Therefore, if customer has limited install space and required to make two roofing designs, double deck machine is best choose.
As many different shapes roofing sheets,the roofing sheet shape customized.This is just for your reference of one set we sold before.
Where is our High quality glazed tile IBR sheet double layer trapezoidal roof press making machine difference from other competitors?
For this roof press making machine, we have below advantage:
- We choose a innovative way that already solved the glazed tile press step distance problem.That method can ensure the each finished glazed tile will in a same distance step and can be well overlap one by one together.This can save you a lot of money and time for you about this problem.
- We are focus on machine detail design, will use many years experience to supplement the machine details and avoid some problems. Will improve the machine service life.
2. Specifications of Double Layer Forming Machine
| Technical Parameters (some depend on the final design) | ||
| 1 | Style | glazed roof tile double layer roof sheet roll forming machine |
| 2 | Machine dimension | 7500*1600*1650mm |
| 3 | Total wight | 11.5T |
| 4 | Forming steps | Up layer :11rows Down layer :13rows |
| 5 | Forming speed | Glazed design :1.5-3.0m/min Wave design:10-15m/min |
| 6 | Hydraulic station power(Kw) | 4kw |
| 7 | Diameter of shaft | 70mm |
| 8 | Hydraulic pressure | 18-20 MPa |
| 9 | Electric condition(Voltage ) | 380V/3Phase/ 50HZ (or based on customer's need ,for example :220V 440V 415V or 2Phase 60HZ ) |
| 10 | Suitable to process | Color steel plate(G330 or G350 ) galvanized steel coil |
| 11 | Manual uncoiler max capacity | 5000kgs |
| 12 | Control system | PLC |
| 13 | Raw material thickness | 0.3-0.8mm |
| 14 | Effective width | 800mm and 836mm |
| 15 | Material width | 1000mm and 1000mm |
| 16 | Main motor | 5.5Kw |
| 17 | Material of the cutting blade | Cr 12 quenched treatment 58℃-62℃ |
| 18 |
Main Shaft Material |
45# steel with finish turning |
| 19 | Roller materials | 45# Forging Steel with Chromium Plate |
| 20 | Machine Under Frame | 400 H beams and side wall 25 mm |
3. FAQ
4. details photos of Double Layer Forming Machine
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.