H400 Roofing Forming Machine Trapezoidal 380V Cladding Roll Forming Machine
Trapezoidal 1250mm 380V Roofing Forming Machine For Metal Roof And Wall
1. Description of Roofing Forming Machine
Glazed Steel Tile Making Machinery for Colored Glazed Steel Roofing Sheet is used to make the color glazed tiles in batch by the Steel Tile Making Machinery. the finished product of Glazed Steel Tile Making Machinery For Colored Glazed Steel Roofing Sheet is widely used in the construction of various industrial plants, villages, warehouses, supermarkets, hotels, exhibition, family construction, shopping malls shutter doors and etc. It has the advantage of beautiful, classical appearance and grace taste. This machine working speed is around 4-5 meter per minutes.
2. Specifications of Roofing Forming Machine
| Material | Applicable material | GI(Galvanized Steel Sheet)/PPGI |
| Material thickness | 0.12-0.5mm | |
| With yield strength | 235-345-550Mpa Yield Strength | |
| Machine | Base frame | H400 type steel |
| Roller material | 45# steel | |
| Hardness | Heat treatment to HRC58-62 degree | |
| Roller station | 15/15steps to form | |
| Shaft diameter | 80mm/ 75mm | |
| Machine size | 10000*2000*2000mm | |
| Machine weight | 10000 | |
| Machine color | 2.Blue(RAL5015)+ orange (RAL2004), as per the seller factory’s color standard | |
| Working speed | 15m/min | |
| Cutter | Hardness | Heat treatment to HRC58-62 degree |
| Cutting tolerance | ≤±1mm | |
| Material | Cr12MoV(= Z200C12 with at least one million times of cutting life) | |
| Operate | By PLC | |
| Power | Driving way | Gear/Sprocket transmission, |
| Main motor | 11KW | |
| Pump motor for cutter | 4kw | |
| Voltage | 220/380/415/480V- 6050Hz/3Ph --should be confirmed | |
| PLC Control System | Inverter | Schneider Electric/DELTA (Taiwan brand) |
| Touch screen | WEINVIEW(Taiwan brand) | |
| Encoder | KOYO (Japan brand) or OMRON (Japan brand | |
| Cut-to-length tolerance | ≤±1mm | |
| Control voltage | 24V |
3. Feathers of Roofing Forming Machine
- Normally at the coil feeding system, we will give manual cutter then you can remove the untidy part coil or cut at any length.
- We Will use the rubber roller at leveling part to protect the coil surface.
- We will add two more gears for feeding coil smoothly.
- For the roller, we will do the chroming for long time use and beautiful.
- For cutting, we use 4 pillar post cutting system to make sure the cutter can use long time.
- Use special special design of cutting system for cutting fast and the cutter can use long time.
- Good quality hydraulic jacks.
- Use strong thickness frame and holder.
- We will give remoter for control machine easily.
4. Production Flow of Roofing Forming Machine
Manual decoiler→Feeding material into machine→Roll forming machine→Measure length→Hydraulic cutting→Finished Products
5. Details of Our Roofing Forming Machine
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.