Introduction

A dynamic compression plate (DCP) is a metallic plate used in orthopedics for internal fixation of bone,typically after fractures. As the name implies, it is designed to exert dynamic pressure between the bone fragments to be transfixed. Dynamic compression is achieved either by attaching a tension device to a plate or by using a special dynamic compression plate. However, compression plating requires a longer surgical incision to allow insertion of the tension device and the possibility of refracture after the plate is removed. A neutralization plate is used to bridge a comminuted fracture; it also transmits bending or torsional forces from the proximal to the distal fragment. Plates used for buttressing prevent collapse by supporting an area of thin cortex or cancellous bone graft.

• Narrow Dynamic Compression Plate . These plates are indicated for the fixation of various long bones, such as the humerus, tibia, and femur. These are also used in the fixation of peri-prosthetic fractures, osteopenic bone, and fixation of nonunions or malunions in adult patients.
• It is particularly used as a tension band plate for the fracture of the humerus and tibia.
• It is not indicated for fractures of the femur.
• All holes are designed as self-compressing holes. All the end holes are designed for cancellous bone screws.
• Indication: As a neutralization and tension band plate on the tibia (not intended for the femur).
•