Laboratory Battery Combustion Injection Test Equipment Battery Flame Retardant Test
Laboratory Battery Combustion Injection Test Equipment Battery Flame Retardant Test
I.Product introduction:
The battery combustion jet test equipment is mainly used to test the flame resistance of the battery.
The principle is to place the battery on a flame resistant and high temperature resistant mesh screen (the mesh screen has 20 holes every 25.4mm, and the diameter of the steel wire is 0.43mm), and then light the burner below it (38.1mm above the top of the burner). At the same time, observe the battery combustion until the battery explodes or burns down, and time the combustion process.
II.Standards:
IEC60086-4:2000,UL1642:1995), UL2054:1997), UL1642 [13], GB8897.4-20026.3.2.9, GB312412014.
III.Technical Specifications:
1. Burner: inner diameter of pipe orifice is 0.375 inch (9.5 mm) and length is about 100 mm;
2. Bunsen burner can adjust the burning angle of 0-45-90 degrees and is equipped with corresponding angle indicator;
3. Flame application time: 0~99.9 seconds ± 0.1 seconds;
4. Flame height: 10~75 ± 2mm (adjustable);
5. Ignition device: automatic ignition;
6. Width of test cover: 610mm X depth 355mm, octagonal (use double-layer mesh holder to realize rapid replacement of aluminum mesh
7. Height of test cover: 305mm;
8. Test aluminum mesh diameter: 0.010 inch (0.25mm) 16 mesh × 16 mesh;
9. Surface diameter of test round hole: 102mm.
Specifications:
| Impulse voltage | AC 1kv/1.2-50μs(maximum value)1min |
| DC response time | ≤5μs |
| Voltmeter |
Measuring voltage: 0-100V; Display accuracy: F.S ± 0.5% RDG ± 1digit; |
| Maximum short circuit current | 2000A |
| Ammeter |
Measuring current: 0-2000A; Display accuracy: F.S ± 0.5% RDG ± 1digit; |
| Device internal resistance | 80±20mΩ |
| Remote control distance | No solid barrier 7meter |
| Mechanical life | 300,000 times |
| temperature range | RT+10℃ ~ +130℃(adjustable) |
| Temperature fluctuation | 0.5℃ |
| Temperature deviation | 2℃ |
| Observation Window size | 285 x 285mm (10 mm thick) |
| Air inlet | There are two 50mm diameter air patches on the left side of the box (also used to measure voltage, etc.) |
| Bottom of cabinet | The bottom is equipped with four universal pulleys, which can move freely and are fixed. |
| Inner box size | W500 X D500 X H500mm |
| Outer box size | W940 X D780 X H1620mm |
| Cabinet material | Cold rolled plate baking varnish |
| Power Supply | AC 220V10% 50HZ |
| Power | 3.0KW |
| Safety explosion proof |
1. The door is equipped with 10 mm thick double-layer toughened explosion-proof glass, 2. Reinforcing ribs are welded inside the door to make the door more firm and increase the strength 3. The external linked hinge door lock adopts high-strength standard accessories, which is safe, convenient for installation and replacement |
| Controller | PID control system, convenient and intuitive, full-automatic constant temperature, rapid temperature compensation function. Overload automatic power-off system. When the temperature reaches the set time, power-off alarm indication |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.