Lighting Control 100W Motion Sensor ON OFF Switch Optional Detection Range

Compact Size Four DIP Switch 220-240VAC Operating Voltage Microwave Motion Sensor

Features:

1. 4-pole pluggable clamp terminal(L,N,N,L') for 0.5-0.75mm² cable.

2. Microwave frequency would be 5.8GHz±75MHz.

3. Optional detection range, holdtime and daylight threshold.

4. Set the parameters which you want by 4 DIP Switch

5. Compact size suitable for ceiling light and tri-proof light.

6. Loop in and loop out for easy installation.

7. IP 20 with 5 years warranty.

Product Description

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-5m.

Mechanical structure

With four DIP switch poles to set all parameters.

With four poles to easily connect with LED driver and power supply.

  4-pole pluggable clamp terminal(L,N,N,L')for 0.5-0.75mm² cable.

With two installation hole, easily fixed to the lighting fixture for end user.

Detection Area:

In this area, movement will be detected and able to trriger the sensor,100% detection area is known as the strong sensitivity.

Hold Time:

The period of light keeping 100% brightness after moving objects leave the detection area.

Daylight Threshold:

Definition of the ambient brightness;only when the ambient brightness is lower than the preset spcific lux amount,the sensor will work;when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brigtness.

Application Demo 

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "30lux,Disable"

With sufficient daylight,                 With insufficient daylight,             After the last detection and
even when motion detected,          when motion detected, light ON.   the present hold time
light remains OFF.                                                                               elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold time.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected,              After people leave the detection    After the last detection and
the sensor will switch on the         area, light remains 100%                the present hold time
light to 100% brighteness.             brightness within hold time.          elapsed, light OFF.

HD08S.pdf