120-277V IP65 Microwave Sensor Dimmable With UL Remote Control
120-277V IP65 Microwave Sensor Dimmable With UL Remote Control
Features
- 120-277V Input, with UL FCC certificate
- 0-10V dimming or ON/OFF function
- Suitable for Highbay application max 15M
- IP65 for Different Industrial Applications
- Remote Control HD03R
Parameter Table
| Operating voltage | 120-277VAC,50Hz/60Hz |
| Switching capacity | 400W |
| Stand-by power | ≤1W |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | Max.15m ( 49.21ft ) |
| Detection range | Max.ø14m/45.93ft |
| Detection angle | 30°-150° |
| Operating temperature | -35°C~+60°C |
| IP rating | IP65 |
| Life time | 50,000 hours |
| Warranty | 5 years |
Factory Default Setting
- Detection area 100%
- Hold time 5s
- Daylight threshold Disable
- Stand-by period 0s
- Stand-by dimming level 10%.
Remote Control
#HD03R, the standard remote control
Specification Download HD03R .pdf
Wiring Diagram
Installation
Type A: Suitable for highbay light with aluminium shade
Type B: Suitable for directly mounted on the ceiling
Type C: Suistable for UFO highbay light
Type D: Suitable for linear highbay light
Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains OFF.
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20% 30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.
HD406VRH ON&OFF specification.pdf
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.