Rod Antenna 5.8GHz microwave motion sensor module Energy Saving Light
Rod Antenna 5.8GHz Microwave Motion Sensor Module Energy Saving Light
Rod Antenna 5.8GHz Microwave Motion Sensor HD011SR with automatic switch ON/OFF function
Features:
- Switching ON/OFF function.
- With rod antenna module which make it happen to open a very small hole with only removing 1-2 light beads to avoid any shading.
- Rod antenna design which mostly improve the stability of the sensor when installed backside of the metal board inside of the lighting fittings.
- Automatically detect the daylight and remain OFF even detect any movement when the natural light is sufficient.
- Getting different effect and requirements by selecting different detection area, hold time and daylight threshold set by remote controller.
- IP Rating would be IP20 and 5 years of warranty.
- Certificate of TUV, CE, RED, SAA.
Specifications:
| Input | Operating Voltage | 220-240VAC 50/60Hz | |
| Stand-by Power | ≤0.5W | ||
| Switching Capacity | Load Type | Max. 100W | |
|
Sensor Parameters |
Hold Time | 5s/1min/5min/10min | |
| Detection area | 50% / 100% | ||
| Daylight Threshold | 2Lux/10Lux/50Lux/Disable | ||
| Mounting Height | Max.4m(ceiling mounted) | ||
| Detection Range | Max.12m(ceiling mounted) | ||
|
Wireless Parameters |
Operating Frequency | 5.8 GHz ±75 MHz | |
| Switch Control | 0N/0FF | ||
|
Operating Environment |
Operating Temperature | -25℃~+60℃ | |
| Certificate | Certificate Requirement | CE / TUV / RoHs / RED | |
|
Others |
IP Rating | IP20 (Built-in) | |
| Installation Size | 76.9 X 39.9 X 27.7mm | ||
| Packaging Requirement | Bubble bag +Outer Carton(K=A) | ||
| Life | 50000h | ||
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
Dimensions:
Rod antenna design with size of 76.9 X 39.9 X 27.7mm which could be easily installed inside of ceiling light and panel light with open a super small hole on the light board.
Wiring Diagram:
5 pole press-in terminal (L, N,N,L′). N,L for connecting with main supply and N, L’ for connecting with LED Driver which make it very easy to be assembled.
Detection coverage:
Max. detection range will be 12m for ceiling mounted.
DIP Switch Setting:
Detection Area (Sensitivity):
| 1 | 2 | ||
| Ⅰ | ON | ON | 100% |
| Ⅱ | - | ON | 75% |
| Ⅲ | ON | - | 50% |
| Ⅳ | - | - | 25% |
Hold Time:
| 3 | 4 | ||
| Ⅰ | ON | ON | 5S |
| Ⅱ | - | ON | 90S |
| Ⅲ | ON | - | 3min |
| Ⅳ | - | - | 10min |
Daylight Sensor:
| 5 | 6 | ||
| Ⅰ | ON | ON | 5Lux |
| Ⅱ | - | ON | 15Lux |
| III | ON | - | 50Lux |
| Ⅳ | - | - | Disable* |
*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of ambient light level.
Stand-by Period:
| 7 | 8 | ||
| Ⅰ | ON | ON | 0S |
| Ⅱ | - | ON | 30S |
| III | ON | - | 10min |
| Ⅳ | - | - | +∞ |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.