RS485 TDS Electrical Conductivity Sensor Nickel For Water Quality Analysis
Conductivity Sensor EC Srobe RS485 TDS Sensor Electrical Conductivity Sensor For Water Quality Analysis
Product Description
Digital conductivity sensor adopts a new generation of four-electrode/six-electrode technology, with wide measurement range, automatic switching measurement range, built-in temperature sensor and real-time temperature compensation. It has excellent anti-pollution ability and will not cause polarization even in the harsh environment for long-term online monitoring. RS485 output, can be networked without a controller.
* Built-in temperature sensor, real-time temperature compensation
Maintenance method
①The outer surface of the sensor: clean the outer surface of the sensor with tap water. If there are still debris remaining, wipe it with a moist soft cloth. For some stubborn dirt, you can add some cleaning fluid to the tap water to rinse it.
②Check the cable of the sensor: the cable should not be taut during normal operation, otherwise the wires inside the cable may break easily, causing the sensor to fail to work normally.
③Check whether the electrode or light window of the sensor is dirty, whether the cleaning brush is normal, and whether the electrode is normal.
Technical parameters
|
Product name
|
Four-electrode conductivity sensor
|
Six-electrode conductivity sensor
|
||
|
Model
|
DSC480
|
DST481
|
DST482
|
|
|
Range
|
1uS/cm~200 mS/cm
|
1uS/cm~100 mS/cm
|
1uS/cm~100 mS/cm
|
|
|
Conductance accuracy
|
±1%
|
|||
|
Resolution
|
1uS/cm
|
|||
|
Response time
|
<2 sec
|
|||
|
Protection level
|
IP68
|
|||
|
Max operating pressure
|
6 bar
|
|||
|
Temperature range
|
0~ 50°C
|
|||
|
Sensor interface
|
Support RS-485, MODBUS protocol
|
|||
|
Installation
|
Input type
|
|||
|
Power supply
|
DC 6~12V, current <50mA
|
|||
|
Temperature Sensor
|
NTC
|
|||
|
Electrode material
|
Nickel
|
|||
|
Housing material
|
PEEK
|
|||
|
Probe cable length
|
5 meters (default), can be customized
|
|||
|
Size
|
Φ 22 *165mm
|
|||
|
Calibration
|
One or two point calibration
|
|||
Application
Packing & Delivery
Our Company
Xi'an Desun Uniwill Electronic Technology Co., Ltd. was established in March 2019,registered capital of 5 million,and is located in Xi'an High-tech Development Zone. Relying on the abundant university resources in Xi'an, it has carried out technical cooperation with many universities and scientific research institutions, and is committed to monitoring the water environment.
We are committed to the water quality monitoring industry, actively innovating and improving products, and optimizing industry application solutions. We take technology and quality as the cornerstone, honesty and service as the foundation, do a good job of water quality monitoring with our heart, and contribute to the development of the water quality monitoring industry. power. At present, the products are sold to more than 30 countries and regions overseas, and they have established their own sales network locally, cooperate with after-sales and maintenance personnel, and continue to supply water body monitoring equipment.
Our Service
* Standardized workshop and process
* Strict professional quality inspection
* Return is supported if the product is unqualified.
* Fast delivery
* Warranty for 1 years
FAQ
Q: Is your company a manufacturer??
A: Yes,we are a professional manufacturer of online water quality monitoring products: oil in water sensor/ DO sensor/ NH4-N sensor / ORP / COD sensor / Blue-green algae sensor /Conductivity sensor /TDS / TSS /MLSS,ect.
Q: What parameters do you need for product selection?
A: Application, Range, Power supply and Output signal.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be fully pre-inspection before shipping to you. We have the certification of ISO, CE, we could send the certification test of our company to you.
Q: Can you offer OEM services?
A: Yes,we support OEM and ODM products according to your requirements.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q: How about warranty?
A: 12 months warranty
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.